I need to get like the braided steel line for the oil feed line entering/exiting the turbo. Any idea where to get it from/at?

Car Status: P0140 o2 circuit number bank 1 sensor 2 Cel. Ill fix it tomorow lol.

Estimated mileage on engine: 15,xxx

entering the turbo is a -4AN
exiting the turbo is a -10AN

you can make your own with parts form Aeroquip, Russell, or Earls.

or iirc you can get some premade ones from Concept Illusions and a couple other places around here.

personally i'd make my own line or take the measurements *REAL* good and have your local hydralics supply company make one, or call up Jegs, or Sumitt Racing and see if they will do one for ya.
be most concerned with the turbo supply hose as its under pressure, as opposed to the drain which should be at gravity

______________________________________
______________________________________
"Don't fear the weapon, fear the soul of the warrior using it."
"My CEL only goes off when i remove my battery."

Best sum up of working on a 2GNT
DR1665- "#5. Spike that motherfucker on the garage floor and grab a beer. You deserve it."


Ahhhh Priceless . . .
eclipse982nrRST "its actually lightish red"
RoninEclipse2G "yeah, they already have a color for that... it's called PINK"

http://tunertoys.zoovy.com/


Go to the turbodiy section.

They have all kinds of oil line kits.

Browse the site. They have other stuff you might like as well.

Goodnight sweetheart...yes its time to go...bum bum bum bum bum...good night sweetheart yes I am one little a$$hole......bum bum bum bum....

oh thanks for the link

Car Status: P0140 o2 circuit number bank 1 sensor 2 Cel. Ill fix it tomorow lol.

Estimated mileage on engine: 15,xxx

also try www.steathmodeperformance.com

Goodnight sweetheart...yes its time to go...bum bum bum bum bum...good night sweetheart yes I am one little a$$hole......bum bum bum bum....