Ok i am in the process of putting everything back together, and when i put the injector plate and the lower portion of the intake mani i see that the studs don't come out the other side.
Is this normal? I could probably make it work if i back the studs out of the head more but that just doesn't seem right to me
Anyway i made a call to hahn to ask the tech guy but no one answered so i am waiting on a call back a figured i would post here to see if this happened to anyone else.
thanks, Kevin
___________________________________________________________________________ 13psi on a built bottom end with a stock now mtx, check mate.
#102669, "RE: portfueler system(studs to short?)" In response to Reply # 0
Should come with longer stud and bolts...
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#102670, "RE: portfueler system(studs to short?)" In response to Reply # 1
It did but they aren't that much longer the the stockers. I am finding out though that the ones that come with the kit are all like that (according to another site).
I might be heading out to pick up some nice ss ones cause i am hearing bad things about the ones hahn includes now
___________________________________________________________________________ 13psi on a built bottom end with a stock now mtx, check mate.
#102672, "RE: portfueler system(studs to short?)" In response to Reply # 2
Maybe don't thread them in as much? I was having a similar problem when I bought studs for my turbo manifold. I just backed them out farther from the head and then it fit up perfect.
Mike D -------------------------------------------------------------------------------------------------
Originally posted by DR1665 You're welcome to all the beer you can drink, but you have to go get it yourself. Don't get pissy when we point to the fridge and tell you to get it yourself.
#102674, "RE: portfueler system(studs to short?)" In response to Reply # 3
Thats what scares me though, if they are not treaded into the block enough that they might back out and i would have a major problem/plus the intake mani is heavy if they aren't in there enough it could bend the studs or worst.
I think i am just going to pick up some longer ones just to be safe from the local parts store. I would rather be safe then sorry.
___________________________________________________________________________ 13psi on a built bottom end with a stock now mtx, check mate.
Search
Printer-friendly copy
1 User in Chat
