#101934, "tell me what you think about my new Turbo Manifold" Nov-06-07 04:31 PM by 97rs420a
my new mani i just bought for $50 tell me what you guys think if you dont mind and for the guys who want to complain this is my first good post on the site im slowly learning how
I contributed to the Wiki! EVO IX - just a really expensive boost gauge and a K&N air filter 96 Eclipse RS -awaiting registration and inspection 95 Eclipse GS - parts car Mods/Profile - http://www.2gnt.com/index.php?d=cs82685
#101937, "RE: tell me what you think about my new Turbo Manifold" In response to Reply # 1
I think it's a stock manifold with a T3 flange welded on. I also think it's going to crack at the flange
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#101938, "RE: tell me what you think about my new Turbo Manifold" In response to Reply # 2
Can you even get a turbo on there, I would think it would hit the radiator?
Ditch it and get a better one.
Mike D -------------------------------------------------------------------------------------------------
Originally posted by DR1665 You're welcome to all the beer you can drink, but you have to go get it yourself. Don't get pissy when we point to the fridge and tell you to get it yourself.
#101943, "RE: tell me what you think about my new Turbo Manifold" In response to Reply # 4
Originally posted by 97rs420a its for a stock motor for now
uh, so? get rid of it now or get rid of it later. but when you get rid of it later you'll wish you had gotten rid of it now
=Dan=
98rs eclipse- Mods: BC2, C/F hood, custom turbo system consisting of a PTE SC50, turbosmart ultra gate (10psi), star FMIC and pipes, SFMU, HKS SSQV, 3" V-BAND downpipe from ATP, Zeitronix Wideband LCD displaying boost, egt and 02. *** SOLD and will be missed***
2006 gsxr 750- jardine gp1 exhaust, -1,+2 stealth sprockets, DID 525 chain, JD products pro TRE. 0-60 in a sneeze. ran a 10.8 avg 1/4 mile my first time to the track on street tires, stock swingarm and unstrapped.
#101945, "RE: tell me what you think about my new Turbo Manifold" In response to Reply # 0 Nov-07-07 01:40 PM by 97rs420a
if anything if i do keep it il use the lay out to build a custom one besides im in welding classes anyways so i dont think it would be to bad to fab up good idea?
#101949, "RE: tell me what you think about my new Turbo Manifold" In response to Reply # 7
bc i dont have the flange or know the size or anything my stock motors in my car and id still need the turbo flange to figure out the size so now that i have it i was gonna use this one while i make one or keep it as a spare i was gonna check the welds on it and see how good they are but i figure for$ 50 its worth it even for a spare for my motor since its still stock but i dont even have a turbo yet or anything else i found a 96 2g gs for 2k but i dont have the $ to buy it just for the motor
#101952, "RE: tell me what you think about my new Turbo Manifold" In response to Reply # 8
Originally posted by 97rs420a bc i dont have the flange or know the size or anything my stock motors in my car and id still need the turbo flange to figure out the size so now that i have it i was gonna use this one while i make one or keep it as a spare i was gonna check the welds on it and see how good they are but i figure for$ 50 its worth it even for a spare for my motor since its still stock but i dont even have a turbo yet or anything else i found a 96 2g gs for 2k but i dont have the $ to buy it just for the motor
Please use punctuation, that was pretty hard on the eyes. (I almost passed out trying to read aloud it in one breath. ) Seriously, though, as an alternative to consider there are log-style manifolds for around $100.00 on eghey that won't break right away. (But this isn't first-hand knowledge.) They're basically the same thing as CI's manifolds, but about $200.00 cheaper.
#101954, "RE: tell me what you think about my new Turbo Manifold" In response to Reply # 8
Originally posted by 97rs420a bc i dont have the flange or know the size or anything my stock motors in my car and id still need the turbo flange to figure out the size so now that i have it i was gonna use this one while i make one or keep it as a spare i was gonna check the welds on it and see how good they are but i figure for$ 50 its worth it even for a spare for my motor since its still stock but i dont even have a turbo yet or anything else i found a 96 2g gs for 2k but i dont have the $ to buy it just for the motor
Whats up?
It's brandon. I told ya i'd ask around and you got your answers.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#101956, "RE: tell me what you think about my new Turbo Manifold" In response to Reply # 13
thx guys it should be here tomorrow or Saturday. It better he sent it from Oregon on Monday its being shipped usps parcel post. If you guys have any turbo parts that u have laying around let me know please and i might get some from you next month im gonna turbo it stock right now and build up or buy a motor later on. My motors a lil blown right now im gonna pull it out tommorrow i think hopefully just the main bearings are gone so hopefully not to bad i miss driving it over a 92 saturn!!!!!
Search
Printer-friendly copy
0 Users in Chat
