ok i am starting my turbo install doing all the little stuff (running the wires, fitting the tubing, etc..) and i found a spot i want to mount my dual stage boost controller but the way i got it the inlet nosel is pointed in the opposite way i want it to go so i switched it with the plug side (see pic)




anyway i am just wondering if this is ok, cause when i look at turbo xs' site it says the arrow on the controller is suppose to point to the flow of the inlet direction, and the picture they give on there site it is hard to tell how it is.


thanks,
kevin

___________________________________________________________________________
13psi on a built bottom end with a stock now mtx, check mate.

Without seeing it I cant tell. Either contact Turbo XS or I am off mon-wed if you want to stop by before or after work. If your still having problems we can look at your car as well.

Terry

yea i sent them an email asking them about that, but have yet to hear anything(i don't think it will really cause any problems). Anyway if all goes well i will be getting mon off and i will go ahead and install everything(hopes everything goes smooth). I'll let you know how things go terrry, and thank


O and on a side note terry, we need to try again on a meet. I think it would be cool to meet some people now that i am hanging around these boards more often

___________________________________________________________________________
13psi on a built bottom end with a stock now mtx, check mate.