#98666, "RE: Installing Front bumper cover, fender and a fog lights" In response to Reply # 0
Originally posted by dalesmitsu Second question, I have a set of OEM, blue fog light kit brand is PILOT. Can I just hooked them to factory harness, use interior on/off switch. Instead of using what came with the kit. This too, is easy job for any DIY
you can tap into the wires from the origional lights, if there OEM then the current draw should be compatable with the stock wiring, otherwise you will need to run a new fuse and wires to the cabin. if you have to do that, you might be able to salvage the stock switch but use your own wiring up to it
______________________________________ ______________________________________ "Don't fear the weapon, fear the soul of the warrior using it." "My CEL only goes off when i remove my battery."
Best sum up of working on a 2GNT DR1665- "#5. Spike that motherfucker on the garage floor and grab a beer. You deserve it."
Ahhhh Priceless . . . eclipse982nrRST "its actually lightish red" RoninEclipse2G "yeah, they already have a color for that... it's called PINK"
#98668, "RE: Installing Front bumper cover, fender and a fog lights" In response to Reply # 1
Originally posted by foggy45
Originally posted by dalesmitsu Second question, I have a set of OEM, blue fog light kit brand is PILOT. Can I just hooked them to factory harness, use interior on/off switch. Instead of using what came with the kit. This too, is easy job for any DIY
you can tap into the wires from the origional lights, if there OEM then the current draw should be compatable with the stock wiring, otherwise you will need to run a new fuse and wires to the cabin. if you have to do that, you might be able to salvage the stock switch but use your own wiring up to it
Thanks, that helps. This kit from Pilot came with a new fuse,switch and harness. I don't like the style of the switch that came with the kit.
#98681, "RE: Installing Front bumper cover, fender and a fog lights" In response to Reply # 0
Originally posted by dalesmitsu Should I use the mopar Silicon Rubber or Auto Glass Adhesive. To install my bumper cover and right fender, Could I keep right splash shield on too Its an easy task for a diy but wanted asked first. Second question, I have a set of OEM, blue fog light kit brand is PILOT. Can I just hooked them to factory harness, use interior on/off switch. Instead of using what came with the kit. This too, is easy job for any DIY
#98682, "RE: Installing Front bumper cover, fender and a fog lights" In response to Reply # 3
Originally posted by dalesmitsu Should I use the mopar Silicon Rubber or Auto Glass Adhesive. To install my bumper cover and right fender, Could I keep right splash shield on too Its an easy task for a diy but wanted asked first.
What would you need Mopar Silicon Rubber or Auto Glass Adhesive for?
Yes, you can still retain the splash shield with the new fenders and bumper.
Mike D -------------------------------------------------------------------------------------------------
Originally posted by DR1665 You're welcome to all the beer you can drink, but you have to go get it yourself. Don't get pissy when we point to the fridge and tell you to get it yourself.
#98689, "RE: Installing Front bumper cover, fender and a fog lights" In response to Reply # 4
Originally posted by totaleclipse_05
Originally posted by dalesmitsu Should I use the mopar Silicon Rubber or Auto Glass Adhesive. To install my bumper cover and right fender, Could I keep right splash shield on too Its an easy task for a diy but wanted asked first.
What would you need Mopar Silicon Rubber or Auto Glass Adhesive for? Yes, you can still retain the splash shield with the new fenders and bumper.
I have a Haynes book it recommends using it. For better or rust pervention. About the splash shield, I meant could I keep my splash shield on while removing the fender.
Search
Printer-friendly copy
1 User in Chat
