I just had to post this because i am proud of my first attempt at polishing something. I am helping my friend clean up his 96' tsi awd(KRAZYKOREAN's old car if any of you know him from tuners) and we are polishing just about everything under the hood. Here is the hat off the 38mm tial un-polished vs. polished...its a huge difference! it is seriously like a mirror!

96' eclipse gs, 2gb conversion
built bottom end, crane #16 cams, hx40 pro billet, MS1 v3 MSn'S-E, 3.55 trans, quaife lsd

looks really good . i also polished my deltagate and some other stuff

http://imageshack.us>

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels

Thanks! I love the polished intake manifold! how long did it take to polish? I would think it would take forever to get the texture out. I will post some before and after pics of the talon after we are done, it is turning out really good so far...its funny the oil seals went bad in his 50 trim and then it turned into well we have it this far apart so why not go the extra length and clean it all up. My winter project is going to be cleaning up the engine bay on the silver gs. There are alot of things powder coated blue but they are all slightly different shades so i think i am gunna change it up and just go with the polished/red them and ditch the blue. The wiring and vaccum lines are a disaster and need to be cleaned up at the same time!

96' eclipse gs, 2gb conversion
built bottom end, crane #16 cams, hx40 pro billet, MS1 v3 MSn'S-E, 3.55 trans, quaife lsd

Wow, I haven't seen KK's car in a long time. You'll have to post pics. Does it still look the same?

1998 Eclipse GS

GS-T Axleback|CAI|OBX 4-1 Header|AF/X UDP|

The car is hasn't changed appearance wise on the outside, the kid here in minnesota that baught the car kinda ran it into the ground it wasn't meticulously maintained anymore like KRAZY had it, and the kid blew the engine. After this turbo rebuild and cleaning the plans are to go dsm link and she what it can make for power.

96' eclipse gs, 2gb conversion
built bottom end, crane #16 cams, hx40 pro billet, MS1 v3 MSn'S-E, 3.55 trans, quaife lsd

so what exactly is your method for polishing? that does look really good, and i want to do it now lol.

95 Eclipse RS - Sold and In Montana Now
Project 95 GSX - In Full swing.

Because it was a really smooth surface to begin with i started out with 1000 grit sand paper and wet sanded it one direction, then i changed direction and wet sanded perpendicular to what i did last time and sanded until i couldn't see any marks from the first direction. I then moved up to 2000 grit and wet sanded perpendcular to the last time until i could not see any marks from the 1000 grit, and again wet sanded with the 2000 perpendicular to the last. After all the wetsanding i used some 3M rubbing compound and hand buffed it to get rid of the tiny scratches that make it dull looking. It looks pretty good after hand buffing with rubbing compound but i hit it with some eagle one micro polish and used a benchtop grinder with a buffing wheel on it and buffed it until the polish turned black. With a soft clean rag i hand buffed all the blackened polish off it and the finish turned out mirror like!

96' eclipse gs, 2gb conversion
built bottom end, crane #16 cams, hx40 pro billet, MS1 v3 MSn'S-E, 3.55 trans, quaife lsd

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels

wow chris, did you really get all those little receeded sections on the deltagate polished? That must have been a bitch. BTW, got that fitting the other day, thanks again.

I contributed to the Wiki!
EVO IX - just a really expensive boost gauge and a K&N air filter
96 Eclipse RS -awaiting registration and inspection
95 Eclipse GS - parts car
Mods/Profile - http://www.2gnt.com/index.php?d=cs82685

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels