Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 1 User in Chat
Top 2GNT Technical Interior/Exterior topic #96103
View in linear mode

Subject: "Talon roof and preping advice" Previous topic | Next topic
eclipseman1999Aug-16-06 12:11 PM
Member since Jul 25th 2003
973 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96103, "Talon roof and preping advice"


          

I plan on getting my tsi awd painted in a few months and Im going to do all the prep work myself. The guy at earl shieb said it would be hard to paint the roof because its black plastic not metal so they can really sand it very well. Do you guys have any advice on how I could prep the roof for paint because I want the car to be one color. Also the rear quarter and fender are flacking off clear coat and a little paint what would be the best grit to sand so I can spray primer it before paint?


Shawn
99 Eclipse RS
Hahn Stage 2,Full built bottom end with je 8:8 and eagle rods ect..

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic
RE: Talon roof and preping advice, BumpinTalon, Aug-16-06 12:17 PM, #1
RE: Talon roof and preping advice, optikal, Aug-16-06 01:10 PM, #2
      RE: Talon roof and preping advice, SpreadEagle, Aug-16-06 03:05 PM, #3
           RE: Talon roof and preping advice, boosted60trimrst, Aug-16-06 03:59 PM, #4
                RE: Talon roof and preping advice, tbone, Aug-17-06 03:01 AM, #5
                     RE: Talon roof and preping advice, hazardeclipse, Aug-17-06 05:56 AM, #6
                          RE: Talon roof and preping advice, tbone, Aug-17-06 08:41 AM, #7
                               RE: Talon roof and preping advice, TeamDR1665, Aug-17-06 09:26 AM, #8
                                    RE: Talon roof and preping advice, Teameclipse804, Aug-17-06 05:43 PM, #9
                                         RE: Talon roof and preping advice, slowmitsu, Aug-18-06 09:00 AM, #10
                                         RE: Talon roof and preping advice, Teameclipse804, Aug-18-06 08:16 PM, #11
                                         RE: Talon roof and preping advice, eclipseman1999, Aug-18-06 05:33 PM, #12
                                              RE: Talon roof and preping advice, Teameclipse804, Aug-18-06 08:19 PM, #13
                                                   RE: Talon roof and preping advice, boosted60trimrst, Aug-19-06 04:09 AM, #14
                                                        RE: Talon roof and preping advice, Teameclipse804, Aug-19-06 02:16 PM, #15

BumpinTalonAug-16-06 12:17 PM
Member since Mar 23rd 2004
2381 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96104, "RE: Talon roof and preping advice"
In response to Reply # 0




          

The roof isn't black plastic man its still metal...


1995 Eagle Talon ESi

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
optikalAug-16-06 01:10 PM
Member since Jun 23rd 2002
1062 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96110, "RE: Talon roof and preping advice"
In response to Reply # 1


          

the roof on my car was metal haha

that's what happens when you deal with places like that

_______________________

-eric stratton
Kustom Auto Koatings
North East, Md
443-528-8007
http://www.kustomautokoatings.com


  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
SpreadEagleAug-16-06 03:05 PM
Member since May 29th 2003
459 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96114, "RE: Talon roof and preping advice"
In response to Reply # 2


          

Yep all metal, maybe they were talking about the spoiler?


  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
boosted60trimrstAug-16-06 03:59 PM
Member since Sep 10th 2005
1183 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96115, "RE: Talon roof and preping advice"
In response to Reply # 3




          

wetsand the clear with 1500

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                
tboneAug-17-06 03:01 AM
Member since Mar 28th 2006
103 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96116, "RE: Talon roof and preping advice"
In response to Reply # 4


          

your roof is metal, but the moldings over the windows are painted. Also the rear windows have two doffernt style moldings. The more rare of the two windows have a much larger molding. Thats probably what the guy is talking about.

I dont have pics handy of either right now, but Ihave the talon quarter glasses in my eclipse, they look awsome in my opinion.

Tom

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                    
hazardeclipseAug-17-06 05:56 AM
Member since Oct 09th 2003
640 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96117, "RE: Talon roof and preping advice"
In response to Reply # 5


          

Originally posted by tbone
your roof is metal, but the moldings over the windows are painted. Also the rear windows have two doffernt style moldings. The more rare of the two windows have a much larger molding. Thats probably what the guy is talking about. I dont have pics handy of either right now, but Ihave the talon quarter glasses in my eclipse, they look awsome in my opinion. Tom


so the rear windows are different? can you take some pics?


RIP- Rustbucket 1995-2009 emoji

‹hazardeclipse› by the way youre thinking of hazard_eclipse
‹hazardeclipse› thats not my fucking car
‹teklein› Oh yeah
‹hazardeclipse› he stole my name
‹hazardeclipse› fuck that radioactive yellow shit
‹teklein› Hazard_eclipse is the homo.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                        
tboneAug-17-06 08:41 AM
Member since Mar 28th 2006
103 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96118, "RE: Talon roof and preping advice"
In response to Reply # 6
Aug-17-06 08:44 AM by tbone

          

this link show my talon quarter glass painted to match my car. From what I have seen, these are rare and very hard to get. I was lucky I think I only paid like $40 for the pair. The other windows look like any other eclipse window.

<|link>

Tom

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                            
TeamDR1665Aug-17-06 09:26 AM
Donating 2GNT member
14692 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96119, "RE: Talon roof and preping advice"
In response to Reply # 7


          


97 Talon. Notice how the rear quarter glass has the molding that drops down towards the end. On the Eclipse, the glass goes all the way back to the edge of the hatch. It's all pointy and stuff. I prefer the Talon glass. Is this the molding we're talking about, here? emoji

Shawn, remove the moldings over the doors with a heat gun and some piano wire (there is a write up somewhere in this forum if you search). Then prep the roof the same way you would the rest of the car.

This thread is kinda funny. I told John his car might not run any better by the end of the year, but it will damn sure look better than it has in a long time. emoji

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                
Teameclipse804Aug-17-06 05:43 PM
Donating 2GNT member
5174 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96124, "RE: Talon roof and preping advice"
In response to Reply # 8




          

I'd wet sand it using 400 grit. Sand the complete car at least twice. I think I did my car 3 times. It took a lot of work, but each time, you will miss some spots, and after your rinse it off and dry it, you'll be able to better see the spots that aren't sanded as well as the rest of it.

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                    
slowmitsuAug-18-06 09:00 AM
Member since May 26th 2005
343 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96125, "RE: Talon roof and preping advice"
In response to Reply # 9




          

Originally posted by eclipse804
I'd wet sand it using 400 grit. Sand the complete car at least twice. I think I did my car 3 times. It took a lot of work, but each time, you will miss some spots, and after your rinse it off and dry it, you'll be able to better see the spots that aren't sanded as well as the rest of it.


Holy shit. Been forever and a day.

_______

BPU'd skittle

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                        
Teameclipse804Aug-18-06 08:16 PM
Donating 2GNT member
5174 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96130, "RE: Talon roof and preping advice"
In response to Reply # 10
Aug-18-06 08:20 PM by eclipse804



          

Yup, did you have a different screen name before, or do I just have very bad memory?

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                    
eclipseman1999Aug-18-06 05:33 PM
Member since Jul 25th 2003
973 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96129, "RE: Talon roof and preping advice"
In response to Reply # 9


          

Originally posted by eclipse804
I'd wet sand it using 400 grit. Sand the complete car at least twice. I think I did my car 3 times. It took a lot of work, but each time, you will miss some spots, and after your rinse it off and dry it, you'll be able to better see the spots that aren't sanded as well as the rest of it.


So just use 400 grit on the whole car? Because right now the clear coat is flaking bad. Should I use a lower grit and then 400?


Shawn
99 Eclipse RS
Hahn Stage 2,Full built bottom end with je 8:8 and eagle rods ect..

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                        
Teameclipse804Aug-18-06 08:19 PM
Donating 2GNT member
5174 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96131, "RE: Talon roof and preping advice"
In response to Reply # 12




          

Don't go lower than 400 grit. Basically, if you wet sand the car using 400 grit, you will remove all the clear coat from the car. Then your existing base coat will be all there is, and it will essentially be like a primer. Depending on how drastic of a change the color is, they may spray another color base coat to mask out your car color before spraying the actual color.

Make sure you wet sand, meaning you dip the sand paper in soapy water every few seconds or so, before it dries out. You'll be able to tell when all the clear is off, but like I said, expect to go over it two or three times since you'll miss spots. If you wet sand with 400 grit, you really can't mess anything up. I wouldn't go lower than 400 personally. Take your time prepping it, and you'll get good results...good luck!

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                            
boosted60trimrstAug-19-06 04:09 AM
Member since Sep 10th 2005
1183 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96133, "RE: Talon roof and preping advice"
In response to Reply # 13




          

well really if spraying over the stock bascoat ,finish it with 600grit before spraying the new color . 400 tends to leave some small scratch marks

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                                
Teameclipse804Aug-19-06 02:16 PM
Donating 2GNT member
5174 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96144, "RE: Talon roof and preping advice"
In response to Reply # 14
Aug-19-06 02:18 PM by eclipse804



          

Originally posted by boosted60trimrst
well really if spraying over the stock bascoat ,finish it with 600grit before spraying the new color . 400 tends to leave some small scratch marks


Do you mean use 600 grit after using 400 grit to get the clear off? As long as you wet sand and don't let the car/sandpaper get too dry, 400 grit shouldn't be a problem. My car along with hundreds of other cars have been prepped and painted this way by my friend's shop, and it hasn't been a problem.

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Interior/Exterior topic #96103 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.06 seconds, executing 44 queries.