For the 2g's with the power window/lock option, if the switches are plugged into the driver side, does the passenger side also need to be plugged into the harness for everything to operate? For some reason that I never noticed, I was working making some money on the side today for some guy with a 2gnt, and with just the driver side plugged in, the windows wouldnt go up or down, but then when i plugged the other side in (passenger side), everything worked.

Is every car like that, or is his just F'D up?

-MIKE-

Stroked 2.2L

most cars are like that, i know all hondas are, I had crank windows and wired up factory power so i dunno for sure.

-----------------------------------
97 RS-T, STAR Stage 2, HAHN FMIC, Decah Lambo Doors, 19" Axis Hiros, Built 420a - SOLD
2004 - G35 6MT 20" HREs & Tein Flex
-----------------------------------

Yes, they are wired together. If the switch is out on the passenger side they will not work from the driver side.

It has to be that way in order to give the driver the ability to control all locks and windows from the main switch while also allowing the passengers their control options too.

Yea, I loved locking the girfriend out of control for the window.

Me- I don't care if its hot and I have the A/C on.. I like my windows down

Her-Asshole

yup if one switch is off they wont work

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels

the reason y they dont' work is because they are hooked up to the same realay behind the radio and if all wires aren't conected then the realay wont do anything.

97 wide body with 1g turbo setup

yup , even with aftermarket spal windows ,they only have one relay also and dont work with one connected

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels