#95775, "RE: Those with Tenzo Seats" In response to Reply # 0
I have tenzo seats too, the evo ones, I bought sliders and brackets through ebay, they're tenzo specific, and yeah my seats rub on the door a lot, once my harnesses get here im going to try spacers to get them to be more level.
#95779, "RE: Those with Tenzo Seats" In response to Reply # 2
go to the tenzo website and look through there stuff, theres 40 bucks for driver and 40 for passenger side, a bit expensive but they bolt up awesome, then you'll need the sliders which were like 36 shipped. I had made my own which were level perfectly but too high off the floor.
#95786, "RE: Those with Tenzo Seats" In response to Reply # 4
I have those same seats but all black, with tenzo brackets and sliders. My tenzo brackets have 3 different mounting heights you can go with. The middle one is the stock height, but I use the lowest one, mainly because I like sitting low to the ground. My seats didnt hit my OEM door panels, however, my new fiberglass panels, they do rub just a bit. They are really comfy seats though, I love them. I use the matching Weapon-r aka tenzo harnesses with them too.
#95788, "RE: Those with Tenzo Seats" In response to Reply # 5
the brackets only have 1 place the sliders have 3 different heights, but you might run into trouble and need to cut the bottom holes inside of the sliders that go by the center console, with the way the brackets are to mount the top hole (I too like sitting low) it will hit the floor.
#95789, "RE: Those with Tenzo Seats" In response to Reply # 6
Originally posted by TaloN2.0 the brackets only have 1 place the sliders have 3 different heights, but you might run into trouble and need to cut the bottom holes inside of the sliders that go by the center console, with the way the brackets are to mount the top hole (I too like sitting low) it will hit the floor.
Ah you are right, I had it backwards, and yes I did also cut the bottom of the bracket.
#95826, "RE: Those with Tenzo Seats" In response to Reply # 12
ok I got it, when you get your slider it will have a bracket with 3 holes to adjust seat height, on the insides you'll have to cut the bottom to holed off so you only have 1, to level it out bolt the outside sliders on the 2nd hole instead of the last hole and it levels them up, i'll post pics when i get back from mass, the difference is extremely noticeable.
#95839, "RE: Those with Tenzo Seats" In response to Reply # 15
sliders are seat specific not car, the brackets should be the only care specific as far as i know, they go out today but you may wanna check first, ive never heard of sliders being car specific.
----------------------------------- 97 RS-T, STAR Stage 2, HAHN FMIC, Decah Lambo Doors, 19" Axis Hiros, Built 420a - SOLD 2004 - G35 6MT 20" HREs & Tein Flex -----------------------------------
Search
Printer-friendly copy
0 Users in Chat
