Hi Im painting my interior with spray paint. THe whole thing, or like Cyan's. Anyways, Ive done parts chrome, the typical parts, but it looked bad because the texture was rough.
So my question is,
Is there and What pre-paint do I use that can smooth out the surface and make it smooth and not textured?
What brand of spray can I use to put paint it all? How many coats?
Is there and what kind of after-spray coat thingy do I use.
#9560, "RE: Paitning inside things to remember" In response to Reply # 0
if you want a smooth finish you need to use clear coat. the process i did was..
sand with 800 lightly, clean the piece..prime it, sand the primer lightly with 800, clean it..add a few coats of color, making sure each coat is dry before you do the next. once its lookin good with color, start adding clear coat, again, waiting until each coat is dry before you do the next. i did 5-6 coats of clear. anything above that the pieces will start to turn a milky white color. email me if you have any more questions
#9561, "RE: Paitning inside things to remember" In response to Reply # 2
LAST EDITED ON 15-Oct-01 AT 08:12 PM (PST)
yeah i have noticed that things ive painted were more smooth when i use the clear coat.. plus it helps to protect the paint too and gives a nice finish..
also i think krylon is a good brand of paint to use.. you can get it at wal-mart i believe..
-Jason
95 GS
short air ram - custom grill - removed front license plate - custom stereo system - 2 Kenwood 10's powered by Kenwood amp - Hiper Blue Headlights - F&R Upper Strut Bars - 2 fan mod
Search
Printer-friendly copy
3 Users in Chat
