I got my new hood installed today after i finished my paint, and the damn thing will not shut all the way down very easy. i can push down like hell and make it latch but it doesnt even go all the way down, i think its the ECU on the left hand side stoping it ... just wondering if anyone had this problem and what you did to fix it. thanks alot

did u check the rubber alignment stoppers

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels

if its anything like the aerogear predator hood you will have to relocate the ecu,i had it, pain in the ass i just dropped the ecu down a little and it worked, the hump is in the hood for a reason.

-----------------------------------
97 RS-T, STAR Stage 2, HAHN FMIC, Decah Lambo Doors, 19" Axis Hiros, Built 420a - SOLD
2004 - G35 6MT 20" HREs & Tein Flex
-----------------------------------

so im assuming just undo the bolts i see holding it on and try to get it to go down, maybe an inch. ill give it a try today, gotta get my fenders and stuff all put back on. imma try to get my digital camera to work and put pics up. i dont think its too bad myself ... but anyways ill see if i can get it to work. thanks

_______________________________________
The end of the internet begins here... www.broke-off.com

tell that to all 3 aerogear hoods i had, the ecu pokes up just enough for the hump to be needed, you can get it there without moving it but its a tight squeeze

-----------------------------------
97 RS-T, STAR Stage 2, HAHN FMIC, Decah Lambo Doors, 19" Axis Hiros, Built 420a - SOLD
2004 - G35 6MT 20" HREs & Tein Flex
-----------------------------------

man i still can not get it to line up straight, it doesnt look to be the ecu, i trimmed the underside of it down some, and now it looks to be the hump on the left hand side, anyone with the trd hood?

hmm check your ac line, and radiator overflow, thats some other things i had relocated for the aerogear, its a pain in the ass which is why i got rid of it, nothing was where its supposed to be i'll get some pics if you need

-----------------------------------
97 RS-T, STAR Stage 2, HAHN FMIC, Decah Lambo Doors, 19" Axis Hiros, Built 420a - SOLD
2004 - G35 6MT 20" HREs & Tein Flex
-----------------------------------

I dont mean to hijack this thread but has anyone seen/heard/thought of a one-off hood WITHOUT the hump? (that would be nice)

-EE

http://www.freeimagehosting.net/>

that would just look ummm plain and odd, and like every other car =)

-----------------------------------
97 RS-T, STAR Stage 2, HAHN FMIC, Decah Lambo Doors, 19" Axis Hiros, Built 420a - SOLD
2004 - G35 6MT 20" HREs & Tein Flex
-----------------------------------

yeah bro pics would be great .... it could be the coolant tank i think either that, or the hump in the top corner ... i can push it down all the way when i have it shut on the bottom corners, but it doesnt budge at all on the top left corner ... this sucks ass too man, its gapped all up above the headlights, at least an inch, prob more

as for deleting the hump, the vis xgt hoods and such delete it. i've seen a few.

95 Eclipse RS - Sold and In Montana Now
Project 95 GSX - In Full swing.

xgt doesnt delete the hump, if i can get a pic of mine from the side those 2 vents are actually humped up, invader possibly could, but the evo hood also is stepped up in the center just enough to work, and not notice the bubble shape to them

-----------------------------------
97 RS-T, STAR Stage 2, HAHN FMIC, Decah Lambo Doors, 19" Axis Hiros, Built 420a - SOLD
2004 - G35 6MT 20" HREs & Tein Flex
-----------------------------------

thats the only pic i have left, it shows how the ac line is run under the strut bar rather than around the strut tower, the ecu and coolant tank are back in the original spots but were moved when the other hood was on it.

-----------------------------------
97 RS-T, STAR Stage 2, HAHN FMIC, Decah Lambo Doors, 19" Axis Hiros, Built 420a - SOLD
2004 - G35 6MT 20" HREs & Tein Flex
-----------------------------------

ill mess around with it some tomorrow, too late to mess with it tonight ... thanks for the help guys, and r34, i love those fenders on the ride, looks good with the mesh in them going with the mesh in that trd hood.