Hi,

im trying to install a Intelliglow needles kit. All the cluster is on the table and im now facing the needle. Ive read in other posts that I have to pull with finger or try to pry with a flat head screw driver. Im trying since 30min and the needle dont come off (im trying with the tach one) I decided to try with a kitchen fork (place under the black center) and try to pull harder... nothing. WTF ????

thanks

forget the fork. Get 2 spoons and put them on either side of the needle. then you can lift off the needle with even pressure on both sides...

RIP- Rustbucket 1995-2009

‹hazardeclipse› by the way youre thinking of hazard_eclipse
‹hazardeclipse› thats not my fucking car
‹teklein› Oh yeah
‹hazardeclipse› he stole my name
‹hazardeclipse› fuck that radioactive yellow shit
‹teklein› Hazard_eclipse is the homo.

Thanks for the spoon, the installation is completed but I got problem with the recalibration. My rpm is ok. The speedo is a little off buy I will put it back when driving at 60... the major problem is the temp gauge, when a first start the car after install the needle was a little over the C. The needle has go up when it warm, but when I shutdown the car it will not drop... just stay at the same place or move down maybe... 1/4 " ????

Mods like that arent worth it to me...

you lose functionality for some unearthly neon glow....
When I fix my RS all the bs is coming off for good (mistakes)
-M3 Mirrors
-Indiglo Gauges
-Rattle Can Sprayed Interior (looked good to most ppl, no chipping but tacky im my eyes)

stock is the way to go bro fo sho

-EE

http://www.freeimagehosting.net/>