Hey, I was wondering if anyone has used tint spray to tint their taillights? As you can probably tell from my sig I'm going for the blacked out look. Anyone have any advice?

http://www.imagestation.c
om/picture/sraid26/pc652696357
0dc74148147a1d995c0a2a/fe37332
4.jpg

http://www.imagestation.com/pi
cture/sraid26/p1d091c6930eb7e9
f557d53f3184914cc/fe39309a.j

well shit, my sig doesn't even work, any help?


http://www.imagestation.c
om/picture/sraid26/pc652696357
0dc74148147a1d995c0a2a/fe37332
4.jpg

http://www.imagestation.com/pi
cture/sraid26/p1d091c6930eb7e9
f557d53f3184914cc/fe39309a.j

Joe, I believe you have a SPACE between your "o" and "m" in your link.
Moreover, you have spaces in two or three other placesin your html link.

Therefore, I've gone to the liberty of correcting those spaces and have posted the picture below. Now, you can RIGHT CLICK on the picture, go to properties, and copy and paste the correct link into your signature within the profile section of your user control panel.



Hope that helps!

_____________________________________
Jason ESi-T

04' BMW 325Ci
91' Nissan 240SX
98' Eagle Talon ESi (sold)

Welcome to the board, Joe. In fact, yes, I tinted my tails earlier this summer using some VHT Niteshades (from Summitracing). If anyone does it, I just recommend scuffing the surface some, using many, many light even coats and using Clearcoat afterwards for a nice shine. Also have Mineral Spirits nearby to correct any screwups.

_____________________________________
Jason ESi-T

04' BMW 325Ci
91' Nissan 240SX
98' Eagle Talon ESi (sold)

i did mine black to but re did it with red where it matched the brakelight red. looked like giant eclipse taillights.

I got banned for being a constant tard.

Damn Jason your car looks so damn nice. How dark of tint do you have?

------------------------------------------------
98 ESi
95 GS

Thanks man!

My car is tinted all the way around at 21%. The cops can hardly believe it either. Not that it matters after I show them my doctor's note.

The damn thing looks black as heck at night. I like the look.

_____________________________________
Jason ESi-T

04' BMW 325Ci
91' Nissan 240SX
98' Eagle Talon ESi (sold)

Yeah I like the whole tail tinted instead of 3/4 of it

I might do a light tint on my tailights, also want to tint my clear side markers, they are a little too nright compaired to the factory tint of the headlights.

"The fastest draw is when the sword never leaves the scabbard,
The strongest way to block, is never to provoke a blow,
And the cleanest cut is the one withheld."

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All Motor Beast in the Making

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold, Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

is there anyway you can take the paint off if you decide you dont like it anymore??

Toney
'97 RS 5 Speed (totaled)
15.4606@88.42 Mph
96 Toyota Celica GT
88 Toyota Supra NA-T (w/ sports package)
Got Boost?? Hell yeah I-6 turbo powah baby!

Yep, just use paint thinner.

"The fastest draw is when the sword never leaves the scabbard,
The strongest way to block, is never to provoke a blow,
And the cleanest cut is the one withheld."

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All Motor Beast in the Making

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold, Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Cool

I wonder how just tinted the top half like Jason, would look on my Talon...

Maybe I'll try it one day.

-----------------
1997 Eagle Talon ESi
Check out more pictures here: http://mikelaidlaw.tripod.com



MODS
-----
Blitz Front Bumper - Invader Type 1 Side Skirts - 17" Gunmetal Motegi MR7's - Final Drive Gear Mod - H&R Lowering Springs - 97 Eclipse Headlights - Taillight Mods - Interior Colouring/Lighting/Accessories - Stereo - Intake Filter, Plugs and Wires