I cant seem to figure out how to remove these two rear windows. (the triangle ones) i unbolted everything around them took off the interior panels and the trim around the door. maybe theyr sealed like a windshield or something? i searched and theres no posts on this. can somebody shed some light on this?
#79550, "RE: How do i remove the rear small windows?" In response to Reply # 1
you have to cut them out. it is a pain and takes some time. i broke one of mine the first time so i would suggest you have a glass co do it they have the right tools to do so and if it goes it wount cost u 75 a piece
http://www.imagestation.com/album/pictures.html?id=2134181717&mode=slideshow t3/t4 setup, je pistone, eagle rods,aem cam gears, crane cams, port and polished head w swirl polished valves, avcr, autometer gauges to be installed, kaminari widebody kit shaved rain seals, door handles, tail lights, relocated gas cap, double humped hood, house of kolors candybrandywine 20in weld evo wheels, air ride, custom fiberglass work (dash interior) more to come just not enough time
#79587, "RE: How do i remove the rear small windows?" In response to Reply # 2
dam im supposed to pull these off my parts car for someone, a shop is out of the question. guess i better start attacking it with a razor. thanx for the replies
#79591, "RE: How do i remove the rear small windows?" In response to Reply # 3
use a really long knife. go slowly/
good luck
http://www.imagestation.com/album/pictures.html?id=2134181717&mode=slideshow t3/t4 setup, je pistone, eagle rods,aem cam gears, crane cams, port and polished head w swirl polished valves, avcr, autometer gauges to be installed, kaminari widebody kit shaved rain seals, door handles, tail lights, relocated gas cap, double humped hood, house of kolors candybrandywine 20in weld evo wheels, air ride, custom fiberglass work (dash interior) more to come just not enough time
#79745, "RE: How do i remove the rear small windows?" In response to Reply # 5
have u guys never seen a glass shop do this or even a salvage yard? get a needle, small but strong wire, thread the needle with the wire and then heat it up and stick it through the glue on the window until it comes out the other side. Now tie on some handles to the wire and work it back and forth as you go around the window and it should cut the glue right in half. Shouldnt take no time to do. It's easier if you have a friend to help either push or pull the window at the same time u do it. zach
Search
Printer-friendly copy
1 User in Chat
