Who has done it? How much of a pain in the ass is it? Any pics? I have some ideas I want to put into work, but the heater controls are in the way.

I've seen them in the glove box before...the only thing that would really be a problem that i could imagine was if the wires were long enough. If theyre long enough then it shouldnt be hard at all....i think there is a post with pics....do a search

'97 GSX (4g63)
99 front facia/Big 16g turbo, 16psi/custom intercooler piping/turbo xs dual stage boost controler/greddy bov/MSD 8.5mm superconductor wires/NGK plugs/18" hyper black rims w/chrome lip/aem drilled and slotted rotors/front upper and rear lower anti-sway bars/test pipe/magnaflow highflow cat/cat back exhaust/eibach springs/ground control coil-overs/1600lbs act clutch/organic flywheel/zeotronics digital air/fuel readout/autometer sportcomp boost and cobalt egt gauges

Are you talkin about the orange one? I seen that one. I have no prob extending the wires its the recurculative cable Im thinking about. Im thinking just going without it.

Originally posted by DJ420a
Are you talkin about the orange one? I seen that one. I have no prob extending the wires its the recurculative cable Im thinking about. Im thinking just going without it.

I eat emo kids for breakfast

1995 Eagle Talon (SOLD)
72' SuperBeetle
72' Standard Beetle
56' Deluxe Beetle

The cables would be the hard part. Actually if you get creative it should hold you back at all. You can get universal cables used in throttle control to replace them so you can make them longer. Parts stores may be able to help you, not autozone but actual parts stores. napa might have something they can work with to get you a general cut to size. You just need to make sure you have a solid wire type cable and get creative with the attachments. Lawnmover cable is very close to what i am talking about.

If you do it def post some picts.

Terry

96 Eagle Talon ESI....Daily driver

97 Eclipse.........

Im definitley doing it. Im just trying to figure out where I want to put it. Either console compartment, glove box, or mounted to the underneath of the front of my drivers seat. Mounted to the frame so the seat can still be adjusted. Then its outta the way.

If you mount them in the glovebox I wanna see pics. That shit would be badass!

"Natty Ride"


http://dirty.thisfreedumb.com/

I havent totally decided if its going to go in the glove box, even though that would be the easiest place to put it, but thats why Im leaning against it. Ive been measuring and seeing if it will fit in the console compartment or under the drivers seat. Any opinions?

I think the glovebox would be the coolest place. The console second. The seat idea just doesn't seem right. Your car though. I do want pics when your done where ever you put it.

"Natty Ride"


http://dirty.thisfreedumb.com/

Im going over to the shop today to atleast see how much I have to add to the harness to sit it in the glovebox. If I am successful, I will take pics, they will be just sitting there, but I will take pics.