Is there any easy way to take of the dash panels? (Up around the middle air vents, to get acess to the air vents)? Also, how hard is it to take the door panels off so I get get wire from the door the the dash in the specified spot where the wires are now?

Thanks
-Jason

the airvents on the dash just pull right off...

the door panels have like 6 screws and then pop off. you have to remove all the door panel components from the rear of the door.

I wouldn't attempt running wires through your factory door boots unless you know what you're doing. there's alot of wires you can damage, and you have to drill through the plastic grommet to get anything through.

__________________________
...just my $.02
95 GS

____________________________
My $.02
95 GS

The big panels, just easily pry them up one side at a time and pull them off. The air vents, just grab them in a solid place and pull them out. Use a flat screw driver to pry the big parts off.

koolade's right, to do your speaker leads into the door you gotta drill and shit. stereo place up here wants a shitload of labor to redo mine. may know about them. autosound in lancaster PA they have a subaru that hit 171.4 db in IASCA finals last year.

"Canada - The Maple Leaf State"
-Me

BKR5E-11's
cone filter
brospeed muffler from mx-3
exhaust leak (mad power gain)

http://www.ocaddict.com

thanks beefgg for the sig