They have finally made the website. I found out they redesigned the upper panel to look a little nicer (now I need to get them to give me one of those)

Here is what it looks like during the day


And you can go to their website www.speedhut.com -> Custom Gauges -> Mitsubishi and play around and see what you want it to look like at night.

I will try to snap some shot of mine when I get home tonight to give you guys a good night shot of the whole setup with the HVAC and the Gauges to match.

They priced them at $30 + Shipping, which is right at what we had talked about for a group buy price.

___________________________________

Thats a good price man. I just wish they could do something about the temp selector. that looks kind of generic. Can't wait to see the night pics though.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=



99 Eclipse RS

"Can't we all just hit a Bong"?

That is actually an improvement over the temp selector that I have. They made mine kind of ghetto and ghey, but I can show you mine vs how they changed it.

___________________________________

I went to the speedhut site and I cannot find them on there at all. Could someone hit me up with the direct link.

--------------------


- 05 Subaru STi
- 97 eclipse gs (289whp w/ 276tq)

http://www.speedhut.com/el_detail.asp?catagory=MITSUBISHI&auto_number=437&bhcp=1

there you go

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=



99 Eclipse RS

"Can't we all just hit a Bong"?

did you get a chance to take pics ?

___________________________________

Yeah, would like to see it to compare.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=



99 Eclipse RS

"Can't we all just hit a Bong"?

Here we go...sorry my digicam sucks, but I don't know how to take good pictures with the flash turned off. So, here are the blurry ass pictures. Sorry, on top of all of that, my batteries died so I can't take anymore. I suck at picture sharing





The gauges have the blue LED needles from www.importintelligence.com too.

___________________________________

those are the old ones though. Did you get the new ones cause I think the lines accoss the temp will light up gay

So the colors on the Temp gauge part are all blue? they dont go from blue to red/ cold to hot?

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

I think the ones you have look better. I like the look of the wedge shape for the temps other then some squares that don't mean poop. No Offense.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=



99 Eclipse RS

"Can't we all just hit a Bong"?

Where did you get the blue needles? I had seen them before, but I forgot where.


Andy

Check out my homepage:
http://www.geocities.com/ozzmosis86/Home.htm

and my pics page:
http://community.webshots.com/album/95705837hSPLvt

--------------------
99 GS-Turbo 3.55 MTX
S16G @ ~15psi - FMIC - Forged Internals
Clinton Township, MI

Status: Parting Out...

I have reverse indiglos that have red squares for the redline markers. I'm sure it can be done somehow.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=



99 Eclipse RS

"Can't we all just hit a Bong"?

more than likely, later on they will have one be blue and the other be red. right now i'm not worried about that, i'm just glad i can get some HVAC gauges that will match my gauges.

Ozzmosis86 - you can go to importintelligence.com and get the needles. I made mine though.

I might have to order these. Do you think they will match the AC Autotechnic reverse gauges?

Also to the person ^ that asked about the needles, i have them also, i got the from www.importintellegence.com If you get them, beware that you need to remove the needles (or at least i couldn't figure a way not to), and it's a bitch to recalibrate them. If anyone gets the needles, i can let them know a step-by-step.

Like the man said ^^^ www.importintelligence.com needles. Recalibration is a bitch, but having a SAFC made it much easier than in the ESi. I sanded down the bottom of the needle and repaited the bottom white.

I have no idea if these will match any other kind of reverse indiglo gauge because I'm guessing each company makes their own luminant material, but I dunno.

___________________________________

their HVAC gauges will match their own gauges. That's the only way I know of that you can get matching gauges. Mine will slightly match but not completely sure. I'll have them here by the middle of this week(or so they said) and i'll install them and take some night pics.

i got mine installed last night and i'll post pics of them when I get my camera back. I am pretty impressed but a little dissappointed that they aren't similar to the stock ones in design. oh well. I am pretty sure they will change the design later on......i hope.

its hilarious, the pic of the 95 NT cluster has a CEL on