Alright I know you can take off the entire front fascia and put grill mesh on that way... I was wondering if anyone has found out an easier way? Oh by the way I am doing this to a 98 eagle talon... SO if you have any ideas.. or if you suggest I take off the fascia then let me know.. thanks
#7485, "RE: How Do You Put In Grill Mesh??" In response to Reply # 0
I just took off my front, Your better off doing that because you can get it held on better, Oh and if you do take the big black beem off. Its the bumper but I guess it don't really do shit because its only held on by 4 small bolts
#7486, "RE: How Do You Put In Grill Mesh??" In response to Reply # 0
Alright.. now one more question.. how do you take off the bumper?? i assume it's relatively the same as it was on my 96 venge.. drop the inner fenderwell plastic.. get to two bolts holding the bumper to the fender on each side.. take out the 4 bolts running across the front of the fascia.. do you also have to take out the headlights to get to braces that are beneath them? that's how my venge is.. just wondering if it's the same.. also i saw a couple other plastic anchors in the front of the fascia..
#7487, "RE: How Do You Put In Grill Mesh??" In response to Reply # 2
Ok open the hood take the bolts off that are on top of the bumper, pop off the fender wall take the 2 bolts on each side, then under the head light there are some plastic screws just rip them off. Under the bumper take off all the bolts and shit can them. Now your bumper should come off. Alls my front is held on by is the top bolts and the side ones and every thing is cool ans easy to take off
#7488, "RE: How Do You Put In Grill Mesh??" In response to Reply # 0
on my venge i couldn't get the headlights out so i worked my way around it.. is that possible on my girl's car or is it absolutely necessary to take out the headlights?
#7489, "RE: How Do You Put In Grill Mesh??" In response to Reply # 4
i didnt have to take off my lights. and do forget about the 4 bolts that hook the bracket up to the frame. there will be 2 on both sides, i think 15 mm, and all the others are 10 mm bolts.
Search
Printer-friendly copy
1 User in Chat
