i know i saw some one here that had a shift plate no boot. how did you do this??

thnx

"full throttle or bust"



http://www.clubs.yahoo.com/clubs/eclipticrides

mods:
gutted cat.
cut out res.
GS-T muffler
pvc cai
hotter spark plugs
sticker on back
mesh grill
piaa plasma blue fog lights
altezas
mods to come:
turbo

/nitrous/cyclone engine swap
one of the three.
eibach coilovers
17 in. white racing wheels
custom exhaust
body kit
paint job
wing
ect.

Oh I got one of those, it came with my car from the factory. Damn automatics.

-Nick

the guy listed it in his sig, it said "custom shift plate(no boot)" or something like that.

"full throttle or bust"



http://www.clubs.yahoo.com/clubs/eclipticrides

mods:
gutted cat.
cut out res.
GS-T muffler
pvc cai
hotter spark plugs
sticker on back
mesh grill
piaa plasma blue fog lights
altezas
mods to come:
turbo/nitrous/cyclone engine swap
one of the three.
eibach coilovers
17 in. white racing wheels
custom exhaust
body kit
paint job
wing
ect.

I was being sarcastic.

-Nick

hey tim, i hate to bother you, but can you post how to do it here or email it to me. i hate to be a pest, but i have my whole int. apart, everything, carpet, panels, center, ect.
thanks bro

"full throttle or bust"



http://www.clubs.yahoo.com/clubs/eclipticrides

mods:
gutted cat.
cut out res.
GS-T muffler
pvc cai
hotter spark plugs
sticker on back
mesh grill
piaa plasma blue fog lights
altezas
mods to come:
turbo/nitrous/cyclone engine swap
one of the three.
eibach coilovers
17 in. white racing wheels
custom exhaust
body kit
paint job
wing
ect.

that would be me!!! see my sight...


http://my97rs.homestead.com/mywebpage.html

"Be responsible and plan for tomorrow but live today like tomorrow will never come"
97 RS
Custom CAI
AF/X UDP
Bored TB-55mm
GS-T exhaust
"Super Good" plug wires
Front & Rear upper strut bars
Rear lower Stablizer bar
Front RRE lower Tie bar
Eibach Sportline Springs
Powerslot Rotors
S/S braided brake lines
Axxis Metal master pads
17" Focal Type 161's w/ Z-rated rubber
Stock shifter shortened 1.25in
Energy Suspension Shifter bushings
Custom shift plate(no more shift boot)
Indiglos
Grillcraft 3-pc. grill
V-Tech Taillight covers
Plus, all the little changes...

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

that is sweet dude, how did you do that?? you gotta tell. that is sweet.

"full throttle or bust"



http://www.clubs.yahoo.com/clubs/eclipticrides

mods:
gutted cat.
cut out res.
GS-T muffler
pvc cai
hotter spark plugs
sticker on back
mesh grill
piaa plasma blue fog lights
altezas
mods to come:
turbo/nitrous/cyclone engine swap
one of the three.
eibach coilovers
17 in. white racing wheels
custom exhaust
body kit
paint job
wing
ect.

thanks very much... im gonna write up a "how-to" this week and send it to the admins for putting on the main page. if i don't get around to that i will at least post what i did by this weekend
thanks again


http://my97rs.homestead.com/mywebpage.html

"Be responsible and plan for tomorrow but live today like tomorrow will never come"
97 RS
Custom CAI
AF/X UDP
Bored TB-55mm
GS-T exhaust
"Super Good" plug wires
Front & Rear upper strut bars
Rear lower Stablizer bar
Front RRE lower Tie bar
Eibach Sportline Springs
Powerslot Rotors
S/S braided brake lines
Axxis Metal master pads
17" Focal Type 161's w/ Z-rated rubber
Stock shifter shortened 1.25in
Energy Suspension Shifter bushings
Custom shift plate(no more shift boot)
Indiglos
Grillcraft 3-pc. grill
V-Tech Taillight covers
Plus, all the little changes...

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

Yeah loks nice and clean, what I'd like to do is make a ferrari style gated shifter plate out of polished aluminum or chrome, something like that... any volunteers to make one for me?

"Character is doing the right thing when no one is looking."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, NRG Susp. Motor Mount Ins., 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads, S-AFC, SS Clutch Line

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, EGT, Hooker 4-1 Stepped Header

Waiting for: Front Lower Tie Bar, Ported/Polished Intake Manifold

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Unfortunatly, theres not enough shifter arm movement to do that. the arm is to thick, and theres just not enough room between gears with the shift pattern to do that. i tried! sorry

http://my97rs.homestead.com/mywebpage.html

"Be responsible and plan for tomorrow but live today like tomorrow will never come"
97 RS
Custom CAI
AF/X UDP
Bored TB-55mm
GS-T exhaust
"Super Good" plug wires
Front & Rear upper strut bars
Rear lower Stablizer bar
Front RRE lower Tie bar
Eibach Sportline Springs
Powerslot Rotors
S/S braided brake lines
Axxis Metal master pads
17" Focal Type 161's w/ Z-rated rubber
Stock shifter shortened 1.25in
Energy Suspension Shifter bushings
Custom shift plate(no more shift boot)
Indiglos
Grillcraft 3-pc. grill
V-Tech Taillight covers
Plus, all the little changes...

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

Anybody know if the B&M short throw has a thinner shaft. Thats the shifter I want to get eventually... maybe then?

"Character is doing the right thing when no one is looking."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, NRG Susp. Motor Mount Ins., 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads, S-AFC, SS Clutch Line

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, EGT, Hooker 4-1 Stepped Header

Waiting for: Front Lower Tie Bar, Ported/Polished Intake Manifold

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

what do the ferrari style shifters look like i wanna see one.

"Canada - The Maple Leaf State"
-Me

BKR5E-11's
cone filter
brospeed muffler from mx-3
exhaust leak (mad power gain)

http://www.ocaddict.com

thanks beefgg for the sig

B&M is about the same size as the stock one....it actually may be a little smaller...but marginally. it has a pretty nice finish though and would look good if done right.

__________________________
...just my $.02
95 GS

____________________________
My $.02
95 GS

hey tim, i hate to bother you, but can you post how to do it here or email it to me. i hate to be a pest, but i have my whole int. apart, everything, carpet, panels, center, ect.
thanks bro

"full throttle or bust"



http://www.clubs.yahoo.com/clubs/eclipticrides

mods:
gutted cat.
cut out res.
GS-T muffler
pvc cai
hotter spark plugs
sticker on back
mesh grill
piaa plasma blue fog lights
altezas
mods to come:
turbo/nitrous/cyclone engine swap
one of the three.
eibach coilovers
17 in. white racing wheels
custom exhaust
body kit
paint job
wing
ect.