i was going to get an oem carbon fiber hood, but there are a few other things that im in the market for that are more important to me than replacing my perfectly operational hood. SO, can you install hoodpins on a stock hood? has anyone done it? the only reason i ask is because everyone's sig pics that have pins also have carbon fiber hoods but i saw the transam that had them on the stock hood.....
you can bash if you would like as long as i get an answer
1998 GS Mods: Cold air intake, Ported/polished stock intake manifold, AFX 55mm TB, Pacesetter header, Custom Magnaflow cat-back exhaust system, AFX Underdrive pulley, B&M short throw shifter(cut/welded), Symborski Shift Kit, Solid front motor mount, Monster ground wire kit.
#71376, "RE: question on hoodpins...." In response to Reply # 2 Apr-25-04 08:18 AM by jsupetran
Originally posted by injendsm there is no real point in putting them on a stock hood but it can be done. just dont expect to sell it if you get a cf hood in the future.
Yeah I would not install it cause when you do buy a cf hood, you can get back some of the money by selling it.
Plus imho, hood pins are kinda ugly.
-------jezreel 1998 GS with hrc stage 2, sfmu, ml, prokits, egt, boost gauge, apexi tt, haydans tranny cooler, costum dp, dr. uber groundwires, dynotune fp gauge. gst muff, turbo spoiler Boostin since Aug 03.
nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!! thanks for www.kaptainmyke.com for the sig hosting
#71459, "RE: question on hoodpins...." In response to Reply # 5
where do i get the fake hood pins? are they cheap? im thinkin about getting them and if i decide i like the way they look ill get the real ones.... but they only reason i want them is cuz i think they look cool anyways
1998 GS Mods: Cold air intake, Ported/polished stock intake manifold, AFX 55mm TB, Pacesetter header, Custom Magnaflow cat-back exhaust system, AFX Underdrive pulley, B&M short throw shifter(cut/welded), Symborski Shift Kit, Solid front motor mount, Monster ground wire kit.
#71519, "RE: question on hoodpins...." In response to Reply # 6
whats next a black hood on a red car !!~!! seriously though why do u guys sell the stock hood .. c/f sucks .. god forbid a dead bird falls from the sky ... lol i kept mine just incase
#71582, "RE: question on hoodpins...." In response to Reply # 10
so ive decided to just do it on the stock hood, since i dont see any point in selling it anyways even if i do get a carbon fiber hood which im not so sure that im going to.
now, the question is... what color? My car is white, but i have a blue theme... should i get the blue anodized pins or will that look too ricey and just get the chrome ones? what do you guys think?
BTW: Are these things hard to install or are they as easy as they look?
1998 GS Mods: Cold air intake, Ported/polished stock intake manifold, AFX 55mm TB, Pacesetter header, Custom Magnaflow cat-back exhaust system, AFX Underdrive pulley, B&M short throw shifter(cut/welded), Symborski Shift Kit, Solid front motor mount, Monster ground wire kit.
#71583, "RE: question on hoodpins...." In response to Reply # 11
Originally posted by ajcfalcon so ive decided to just do it on the stock hood, since i dont see any point in selling it anyways even if i do get a carbon fiber hood which im not so sure that im going to. now, the question is... what color? My car is white, but i have a blue theme... should i get the blue anodized pins or will that look too ricey and just get the chrome ones? what do you guys think? BTW: Are these things hard to install or are they as easy as they look?
get the chrome IMO. they arent too bad to install, you just have to be careful drilling into your hood etc.. Put masking tape over the spot you're drilling on the hood to help the bit bite and to save your paint in case the drill gets slightly out of hand. when i installed the pins on my stock hood, the drill slipped and i ended up putting a 6-inch gash in my paint with the bit. not good imo. it helps if you take out the headlights when putting the pins in.
-------------------- 99 GS-Turbo 3.55 MTX S16G @ ~15psi - FMIC - Forged Internals Clinton Township, MI
#71590, "RE: question on hoodpins...." In response to Reply # 13
Originally posted by ajcfalcon hey thanks man, one more question. which is better, the hairpin or the torsion pin?
well the conventional cotter pin thing sucks, every time u pull them out they scratch your hood (or at least thats what happened to me. i was always real careful and it wasnt a problem till one of my asslick friends tried to do it and put a huge scratch in my cf hood. that day i took them off and got the ford racing pins with the pin that slides in then u like move the ring so it doesnt come out. i duno hard to explain.
-------------------- 99 GS-Turbo 3.55 MTX S16G @ ~15psi - FMIC - Forged Internals Clinton Township, MI
Search
Printer-friendly copy
0 Users in Chat
