#68422, "Aftermarket power windows with stock switches..."
I just got a hold of some GST door skins with the stock power window switches/ harness. Right now I have a Colibri AFtermarket kit on my RS. It has illuminated switches. There are 4 wires going to the passenger switch and the driver's switch. I know there is ground, power, motor voltage, but what might the other one be. I looked at the stock switches diagram in the manual and it's pretty confusing. Can somebody who's done this help me out, thanks.
#68423, "RE: Aftermarket power windows with stock switches..." In response to Reply # 0
I may be wrong but I believe you have 2 wires that go to the motor to tell it which direction to turn the motor. Your power comes into the switch then when you push "down" it sends signal through the down wire and the motor turns....let's say left. Then when you push the "up" it sends signal through the up wire and the motor turns the opposite way.
Since there's no circuitry involved in those switches it must run off a direct current application which would answer why you have 4 wires. How many wires are on your drive motor assembly?
#90528, "RE: Aftermarket power windows with stock switches..." In response to Reply # 3
Thank you for the response, I already found that while searchin. I just dont grasp how that would work with relays or if I even need them. TY anyway though it is very much appreciated =)
///97 Eclipse GS\\\ -Greddy Header-Greddy Evo Catback-AEM Short Ram-3 Angle, P&P (AMM Work)-B&M short Shifter-Symborski Kit-