#63559, "Possible to make a power options door manual?"
I have a manual options door with rust on the outside and shit. I can get a power options door without the panel and switches for pretty cheap. I have allready started my custom door panels with fiberglass and shit with the manual door panel so i dont want to start over. My question is, can I exchange parts from each door to make the new door manual. Do i need to exchange the cranks or anything? THanks
11.34 at 123 fp3065 28 psi straight pump 93 octane
95 tsi awd 5 speed-2gb 6 bolt dsmlink 95tsi fwd- parts 95 tsi fwd- beater 91 galant vr4- new build
#63572, "RE: Possible to make a power options door manual?" In response to Reply # 0
You need to remove the regulator (the scissor looking part that makes the window go up/down ), the motor is connected to the regulator, so that comes out too lol. Then you need to swap in the manual crank and regulator and you're all set. You don't need to change the tracks, or any of the glass supports/brackets, they are the same.
#63622, "RE: Possible to make a power options door manual?" In response to Reply # 3
Originally posted by lickscissors thanks! but i think BCIeclipse hit everything thats needed....although ive never heard of a manual regulator .... good luck doug
I know it's not called a manual regulator, but thats the easiest way i could describe it.
#63604, "RE: Possible to make a power options door manual?" In response to Reply # 0
Hey dude, if you strip all the power parts out of this door would you be willing to sell them if they work? I know its only one door but its half way there. I already have the power skins so let me know.
Search
Printer-friendly copy
0 Users in Chat
), the motor is connected to the regulator, so that comes out too lol. Then you need to swap in the manual crank and regulator and you're all set. You don't need to change the tracks, or any of the glass supports/brackets, they are the same.
....
