Is there any high temp paint that is brushable so I can paint the letters on the valve cover? Does it have to be high temp paint or will any paint do? I would think it needs to be high temp. Any help would be great, thanks Rob







-AF/X underdrive crank pulley
-AEM Cold Air intake w/bypass valve
-PIAA headlight and foglight bulbs
-Clear bumper lenses
-Eibach Pro-Kits with Tokico n/a shocks
-Pilot Motorsports Front upper, Rear upper, Rear lower strut bars
-PowerSlot rotors (all four)
-Axxis Metal Master pads
-RRE rear camber kit
-Dunlop SP SPORT 8000 tires
-ECLIPSE word on dash
-Red Mitsu symbol on steering wheel
-Painted fog light bezels
-Window tint
-Magnecore wires and NGK plugs
-Purple interior lights
-Purple hose kit

I painted my calipers today with dupli-color engine enamel. Anyway, my post is, i missed a few spots when i was taping them off (didn't feel like taking the calipers off) and i hate leaving spots unpainted so i took a plastic cup and sprayed some into the cup so it pooled at the bottom, then i just used a q-tip and dipped it in, it went on smooth, so i'm sure this would work for a valve cover.

P.S. i suggest using a metal cup or something cuz the paint ate throught the plastic one.

Deze

96' RS
IM: Deze2g
"Friends don't let friends drive stock."
http://www.angelfire.com/geek/dezeclipse

Deze
96' RS
Deze2g@aol.com
http://alterredimage.cjb.net
http://www.angelfire.com/geek/dezeclipse

Thanks for the help. What color did you paint the calipers?








-AF/X underdrive crank pulley
-AEM Cold Air intake w/bypass valve
-PIAA headlight and foglight bulbs
-Clear bumper lenses
-Eibach Pro-Kits with Tokico n/a shocks
-Pilot Motorsports Front upper, Rear upper, Rear lower strut bars
-PowerSlot rotors (all four)
-Axxis Metal Master pads
-RRE rear camber kit
-Dunlop SP SPORT 8000 tires
-ECLIPSE word on dash
-Red Mitsu symbol on steering wheel
-Painted fog light bezels
-Window tint
-Magnecore wires and NGK plugs
-Purple interior lights
-Purple hose kit

Ford dark blue. It's the closest i could find to my interior blue. Looks real good, i'm doing the drums this weekend.
Deze

96' RS
IM: Deze2g
"Friends don't let friends drive stock."
http://www.angelfire.com/geek/dezeclipse

Deze
96' RS
Deze2g@aol.com
http://alterredimage.cjb.net
http://www.angelfire.com/geek/dezeclipse

Sounds cool. You can see good through your wheels too so that makes it even better.





-AF/X underdrive crank pulley
-AEM Cold Air intake w/bypass valve
-PIAA headlight and foglight bulbs
-Clear bumper lenses
-Eibach Pro-Kits with Tokico n/a shocks
-Pilot Motorsports Front upper, Rear upper, Rear lower strut bars
-PowerSlot rotors (all four)
-Axxis Metal Master pads
-RRE rear camber kit
-Dunlop SP SPORT 8000 tires
-ECLIPSE word on dash
-Red Mitsu symbol on steering wheel
-Painted fog light bezels
-Window tint
-Magnecore wires and NGK plugs
-Purple interior lights
-Purple hose kit

On the valve cover anyolor will do basicly.I have regular paint on mine and it has been there for over a year oand not peeled at all.....On the calipers..same shit....its not as hot on these things as one mihgt think at first......



Kaminarikit+WingsWestCommandowing
Home made M3mirrors
Interior mods
Exhaust+dual tip+Open Air
17"rims+215-40tires
some other stuff to on page...

1997 GST Spyder
My car on

Yeah, I painted my letters red with the 500 degree high temp paint from Trak Auto. Used a Q-tip and brushed it on there, the edges of the letters should be easy to do since its an edge and the paint will bleed around it. In fact its a lot easier to do it with a qtip than anything else.

Also, after your paint dries, try putting some armor all on the valve cover itself. Mine is black (not sure about everyone elses) and ive put the armor all on there a month ago, and its still on there, makes the valve cover really stick out.



97 Eclipse
Hawaiian Flava

http://mason.gmu.edu/~marndt