How did you do it? Just take a hacksaw to it or what? I'm putting in my mesh grill tonight and was wondering. Thanks

96 Eclipse Base 5 spd
Rebuilt engine w/ forged internals, APC Air Filter, Clear bumper lenses, 15" ICW wheels, Alpine v12 amp, 2 12" Xplodes, 5.6" lcd monitor, Dvd player, Playstation 2, Power1 Exhaust, Aerospeed Wing, Altezza tails w/ painted center, 20% tint, Silver Graphics, Audiovox alarm system.

Big transformation underway this winter!

I used a saw-zaw (I think that is how you spell it)! I just laid the blade down flat against the bumper, and cut it.

BTW, was you at Princeton this weekend. I don't think that I seen you.

'95 Eclipse RS (sold)
'99 Eclipse GS OZ (sold)
'90 Eclipse GST (sold)
'90 Talon TSI AWD (sold)
'94 Plymouth Laser RS (sold)
'04 Audi A4 Quattro 1.8t (sold)
'08 Silverado LTZ (daily)

No I didnt get to make it. My mom got put in the hostpital in cleveland, so i had to make a trip up. Next time me n tha girl will be there for sure. I'm actually curious what my car would run, since its basically stock. So after i start modding, ill have something to compare to

96 Eclipse Base 5 spd
Rebuilt engine w/ forged internals, APC Air Filter, Clear bumper lenses, 15" ICW wheels, Alpine v12 amp, 2 12" Xplodes, 5.6" lcd monitor, Dvd player, Playstation 2, Power1 Exhaust, Aerospeed Wing, Altezza tails w/ painted center, 20% tint, Silver Graphics, Audiovox alarm system.

Big transformation underway this winter!

what middle? don't cut the evil smiley!

__________________________________
-Ryan

The teeth things. That lil cross looking thing.

96 Eclipse Base 5 spd
Rebuilt engine w/ forged internals, APC Air Filter, Clear bumper lenses, 15" ICW wheels, Alpine v12 amp, 2 12" Xplodes, 5.6" lcd monitor, Dvd player, Playstation 2, Power1 Exhaust, Aerospeed Wing, Altezza tails w/ painted center, 20% tint, Silver Graphics, Audiovox alarm system.

Big transformation underway this winter!

Sorry to hear about that man. I hope that she gets better.

Have you ever been to the track at Bristol? I am going tomorrow night. If you think that you would be interested in going, then let me know, and I will meet you somewhere.

'95 Eclipse RS (sold)
'99 Eclipse GS OZ (sold)
'90 Eclipse GST (sold)
'90 Talon TSI AWD (sold)
'94 Plymouth Laser RS (sold)
'04 Audi A4 Quattro 1.8t (sold)
'08 Silverado LTZ (daily)

Nah i havent been there. I think bristol is like 5 hours from me lol.

96 Eclipse Base 5 spd
Rebuilt engine w/ forged internals, APC Air Filter, Clear bumper lenses, 15" ICW wheels, Alpine v12 amp, 2 12" Xplodes, 5.6" lcd monitor, Dvd player, Playstation 2, Power1 Exhaust, Aerospeed Wing, Altezza tails w/ painted center, 20% tint, Silver Graphics, Audiovox alarm system.

Big transformation underway this winter!

i used my dremel with the smallest drill bit that would fit in to cut the majority of the teeth out... then i fine cut it w/a razor blade and did that at an angle so that you can't see the unpainted parts... you can kinda see in my sig but i'll get a better pic tomorrow in the sun...

i think the font looks much better w/out the teeth...

WTB: Dodge Omni


http://www.geocities.com/shadyporshe851proof/frame_content/indexframe.html

mods: star stage III clutch + 60mm tb + the normal mods, bass, lights well u get the picture

yeah but arent those "teeth" shaped like a U and hollow...not solid? so youll have some U shaped places in the top and bottom of the opening when you cut these out right?

-----------------------------------------
2011 Nissan Xterra Pro-4x

2007 Kawasaki Ninja 650R

1996 Mitsubishi Eclipse RS-NX 75 shot, AEM CAI, P&P t/b and intake mani-SOLD

1964 Buick Electra 225-all original, all power options, 325hp, 445ft/lbs tq

Tin snips and sand paper
I'll take pics tommorrow.

_______________________________________________________

i went away at mine with a kitchen knife

03 rally red evo viii - stock
cardomain page
http://www.cardomain.com/id/steve0677

you mean that black plastic shit where foglamps should be? oh, i used a drill on the two screws to remove them (screws were rusted in there solid)

__________________________________
-Ryan

i used a razor blade its just plastic and cuts real easy just get some fne sand paper and dand it smoth and some primer and matching paint and touch it up

http://publish.hometown.aol.com/southerncomphort/myhomepage/avatar2.jpg?mtbrand=AOL_US

run4cvr used a Saws'All and Uber used a Dremel.

>run4cvr used a Saws'All and Uber used a Dremel.

Actually i used a die grinder for the bumper. I used the saws-all for the inner fender well.

John 96 GS

Dremel and it sucked

__________________________________________
~Chris
03 SRT-4

Hack saw, and a file.....took it right down....turned out good IMO....

"you mean that black plastic shit where foglamps should be? oh, i used a drill on the two screws to remove them (screws were rusted in there solid)"


No they are talking about the "teeth" on the eclipse bumper. There are about 3 verticle pieces of plastic and one that goes horzontal with the ground.

But I know exactly what your talking about with the foglams. Last weekend silvernt, seniess, michael rs, and babyeclipse helped us with ours. Looks so much better imo.


Also if you have the 95-96 bumper, you can take the black pieces off of the teeth and underneath them is your factory paint and it looks really good. The black pieces are removed by grabbing the very back (where the U ends) and peeling them off. Ask silvernt, he liked it:thumbsup. I did his for him since he did our 30hp foglight piece thingy removal mod.

www.ChicagoArea240sx.Editboard.com