When you wired the LEDs for the cruise control button did you still need to use a resistor? I know you need one for the main light, but what about the ones that light up the on and off parts. TIA for your help

Allan
2008 Magnetic Black 350z NISMO /1976 Austin Mini 1098 Special (export)

Member# 1980

I used a resistor on every LED I put in the car.. Dunno if I should have, but I di

_____________________________
1994 Mitsubishi 3000GT VR-4
1990 Plymouth Laser RS Turbo
http://www.laser-eclipse.net


1999 Mitsubishi Eclipse GS -Sold, I miss it

yes.. you will need a resistor for every led.. the car powers every standard lightbulb in the car with 12v.. and so you will need to reduce that voltage when chaning the bulb out with the led... also.. if you are good with sodering and customizing.. consider rigging the resistor to some of the circuit boards inline to where the 12v input would be coming into the board and then to the light socket where you will put the led and use the stock holding points for the light.. that way you make the buttons plug and play for most of them without having to splice wires and whats not..

-Jason

97 Talon ESi-T (forever in progress...)


95 GS (Gone)
16.74@83.18mph
119.8 whp - 113.3 lbs/ft


2GNT #677
My Wiki Page: www.2gnt.com/index.php?d=Iamnotwhoiam
Pictures: http://picasaweb.google.com/iamnotwhoiam/Talon/

Thanks for the help guys

Allan
2008 Magnetic Black 350z NISMO /1976 Austin Mini 1098 Special (export)

Member# 1980