Is there a walkthrough anywhere about how to take off the interior door panel for driver side door, I don't want to mess it up by just tryin to figure it out. It seems like my window came off track or something.
Brandon '95 GS, Auto. AEM Cold Air w/ bypass valve Front Upper Strut Brace Maxspeed coilovers
#48766, "RE: how do i take off the door panel??" In response to Reply # 0
There is one screw behind the door handle inside and one inside the door grip handle you use to close the door. And a couple more on the edge of the door, After those are out just pull the door panel off, its held in by those white clips
#48794, "RE: how do i take off the door panel??" In response to Reply # 1
If you have crank windows you have to take the crank off. If you don't have the special tool to remove the clip you can use a rag instead. You have to push the panel in and slip the rag in and then rotate it to pull off the clip.
#48923, "RE: how do i take off the door panel??" In response to Reply # 1
I got it off and sure enough the window was off the back track.. but it still doesn't go up straight.. kinda comes in unless i push it out with my hand as it's going up... any ideas??
Brandon '95 GS, Auto. AEM Cold Air w/ bypass valve Front Upper Strut Brace Maxspeed coilovers
Search
Printer-friendly copy
1 User in Chat
