ok, so heres before (seat up and down)




and after




Subs and amp are removed but I didnt have time to get all the wiring out, so the purple ground wire is in view.

heres the floor mats:

looks good! just need to make where the back seats flat and put some plexiglass there or somethin.. maybe make a spot to hide wires and shit. someone on here did that.

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

The floor mats look hot, but I dont like that rear seat elimination kit. It just looks like a blanket or towel placed back there. Its real baggy, iono, Im shure you can just stretch it out or sumthing. Like the floor mats and door panels tho.

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition
Check Out My Site For Pix
http://mywebpages.comcast.net/EclipseRaceR/MyEclipse/VIS%20CF%20Hood/

wires are gettin pulled tomorrow didnt have time today. Well power wire isnt, thats gonna be used for the fuel pump rewire (maybe)

I sent silverNT more pix of te install, hopefully he can use them for a write up

"rear seat elimination kit"

why not just call it carpet with holes for the seat belt bolts, thats all it is

^^^^Exactly

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition
Check Out My Site For Pix
http://mywebpages.comcast.net/EclipseRaceR/MyEclipse/VIS%20CF%20Hood/

I dont like it, even though i dont have people ever sit in my backseat i'd rather leave them in there. That looks way too tacky

>"rear seat elimination kit"
>
>why not just call it carpet with holes for the seat belt
>bolts, thats all it is

indeed

95 gs-t
6 bolt swap
T-2small turbo
15 Psi
Joe P mbc
Greddy uip
Greddy lip
Greddy bov
Supra smic
Borla cat back exhaust
Gutted cat
Apexi Safc
Walboro 255 fuel pump
Autometer gauges -Egt,Air/Fuel and Boost

just make it tighter it looks to saggy as soon as you do that it'll look bad ass

ditto, id ditch the emblem to..

DWAYNE H

www.gottude.com
Red/Black/Silver 01 GSXR 750
Lots of Apexi components...

imo, ugly. looks very unprofessional... if it was all smoothed out it n not baggy would look alot better. id rather jus leave mine the way it is, with nothing there. all that metal n shit.

on another note, how is that dynomat working? thats exactly were mine system would rattle

that boy K-Y
kbnkb@sbcglobal.net
talonky36 (aim)

04 srt-4 (low and slo)
96 talon esi (still broke make me an offer)

a tip for malenko, try reinstalling it like this, that is why it looks so baggy and out of place, it was cut to only fit like this, and not under the rear strut tower plastic covers. i installed THIS kit in my car and it fit perefectly with no problems, no wrinkles, and no sag, it fit like a glove. well, you know where im at, aim me with any questions

I'm sorry but I agree, it just doesnt look professional to me. Looks like u tacked down a bunch of felt sheets from Hobby Lobby.


CAN WE GET A CLEANUP ON AISLE 4! (oh no he just didnt), SOMEBODY JUST SPILT A BIG BAG OF (oh yes he did) !!!

https://www.kaptainmyke.com

I imagine if you reinstall it like SilverNT said, it'll look pretty good. Look at the one he has in his car, it looks good. If you just make some little adjustments you can get it to look right. If you do, put some pics back up.

_________________________________________________
2005 GTO - 10.88 @ 127.94
2004 Flame Red SRT-4 - Stock turbo : 12.5 @ 110 -Traded 7/16/08
1995 Eclipse GS - Project Return to Daily Driver has begun!

Im gonna try and make it fit better, but the holes that were pre punched didnt line up for me. If I cant get it to fit better the back seat is going back in but Im gonna keep the layer of insulation in there to quiet the fuel pump.

I didnt rush the install so I cant figure out why it doesnt look as clean as silverNTs. Id like the other guy who got the kit to post pix as well.

thom, if you would like, i can send you a replacement for the one that i sent you with completely new measurements just to make sure that everything fits perfect. im so sorry about this. just let me know,
chris