#4705, "For those who have put on Stock Sides (97+)"
Ok... finally ordered my 97+ sides for my 96. Those of you who have done this... what kinda hardware will i need? I have the plastic clips for the door caps but I noticed that I mite need screws also... will any screw work or will i need mitsu ones? Also, how much did u guys pay to paint and put them on?
i cant wait til i get them on! my car looks naked without it!
#4707, "RE: For those who have put on Stock Sides (97+)" In response to Reply # 1
Will,
Thanks for the info... i got my sides from satan... but at least i know they will fit for sure and look great... :}
it costed me a lil over 400 for all 6 pieces... ouch but oh wells... u get wat u pay for and i want the best :} ... if u just want the longer lower side part... it's like a lil over a 100... i got a 20% discount on all parts.
#4708, "RE: For those who have put on Stock Sides (97+)" In response to Reply # 2
The side skirts has two pieces right? A short piece in the front and a long one in the rear. How much was the short piece in the front? Cuz it looks like my rear piece is still usable and I don't wanna waste the money. Thanks.
Will 99 Black GS
Removed Front Plate AEM License Plate Frame AEM sticker Bosch Micro Edge Excel Wiper Blades 'Team 2GNT' sticker Air Spencer air freshener
---------- Will 99 GS - Sold 05 G35C 2GNT Member #51
#4709, "RE: For those who have put on Stock Sides (97+) LONG INSTALL" In response to Reply # 0
sorry can't help with 96 but I put them on my 97 and all you need are some SELF-TAPPING metal screws, 2 side tape, and a small drill bit. I put on the door caps first, they use a bolt in the front and you get to drill 1 hole for bottom. Then with some help(I used the ol' man) hold up the skirt and get it where you want it and mark the small holes with marker. Drill the 1 in the back 1st, line up the skirt, and screw it in.let the door cap hold it in place in the front. take that screw out and drill a front and screw it in like the back. After that you can go along and screw the rest with skirt on the car.IT starts lookin pimp now. I'm not real crazy about putting holes in everything, so I used the tape to hold the rear part to the car. You might have to put a screw in the wheels well in the rear to get them straight (mine sat for awhile and warped a little)Hope this helps! If you have some questions mail me or post and I'll try to get back with you.
#4710, "RE: For those who have put on Stock Sides (97+) LONG INSTALL" In response to Reply # 4
Erik,
thanks for the info... i'll get some self tapping screws for sure then. im having a shop put it on so i hope that they have all the necessary items.
Will,
the small front skirt can be bought for like around $50 i think it was like $57 and i got it for 40 some. check out ur local satan... make sure they give you some % off... there is a a 10% off coupon floating around... just tell em u want 10% off... most dealers give that 10% regardless.
Search
Printer-friendly copy
2 Users in Chat
