I do i get the whole assembly out? The two screws in the front seem to be stuck but i am sure i should be able to remove the whole assembly. I am trying to take my bumper off and this seems to be the only thing holding me back.
Thanks, Jerrome
_____________________________________________ Jerrome B. 1995 GSX - Race 1997 GST - Drive 1995 GST - Who the hell knows
#45656, "RE: 95 Foglight Removal" In response to Reply # 0
after you remove the 2 screws (i had to drill mine out) there is a pin type joint that allows the fog light to pivot out. you must take the screws out. if you have to drill them out, i got replacement bolts at home depot.
#45843, "RE: 95 Foglight Removal" In response to Reply # 2 Apr-24-03 07:43 PM by StuartLowery
GEt a dremel and cut slots into the heads you'll be able to take a flat blade screwdriver and back them out. Just be carefull not to hit the light or your paint. Also Craftsman has a special bit that grabs into the screw head to be able to back them out. I just don't know if they are mail order only or store buyable as well.
#45894, "RE: 95 Foglight Removal" In response to Reply # 3
I took mines to the body shop. They did the whole conversion for me as there were to many frozen screws for my liking. So far i have done 10% of most of the work on this car. Nextime i am buy a newer model.
_____________________________________________ Jerrome B. 1995 GSX - Race 1997 GST - Drive 1995 GST - Who the hell knows
Search
Printer-friendly copy
0 Users in Chat
