....How's it done... my kit was molded on but i got into an accident and i need to remove my front without doing anymore damage to it can anyone help me PLEASE!!!! TIA.

you probably going to need to cut it off. Feel around to where the bumper and fender meet in the fender well. Take a power saw and go to town. have fun :o

______________________________________

11.65 @ 115

u will have to cut it at the seam or remove the bumper and fenders

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

So theres no alternative like a heat gun or anything along those lines

no the fiberglass is cured so you have to cut it with either a commericial dremmel or a sawzaw will work too but you neet a steady hand.

2006 WW IX MR
2003 BBY EVO VIII (sold)
256.9WHP & 277.9torque
http://s90395832.onlinehome.us/forum//index.php?sid=a70942a7f65043e6c873e12dcd300692

1998 Eclipse RS --show car--

damn! well how hard do you guys think its gonna be to repair a cracked bumper while its still on the car i'll try to post some pics tonight of the cracks tonight... i really wanna fix it cause i have yet to drive my car with my body kit on ..... i was working on my car all winter getting it kitted dropped rimmed and iced out but my idiot dad hit my front with his avalanche so now im fucked my carbon fiber hood is completly fucked and my fender is all scratched i figured i could prob repair the front cause fiberglass is pretty easy to do but i dunno i might be geeting myself in too deep

One of the reasons I would never mold the ground effects together. It sounds like it would be a bad day if you were to get hit and you basically had to cut away your whatever got it....plus you would have to cut EXACTLY the same place it got molded or else you would be in serious trouble when molding a new piece on





Performance: Stuff that makes my car run better or go faster

Looks: Stock because looks doesnt make my car go faster or run better

Weight Reduction: CF Hood, No A/C or Powersteering Accessories, No rear interior

yeah if you try to use a heat gun you most likely would also burn the bumper, and when fiberglass burns it has toxic fumes. Try and get some pics up so we can see how deep a hole your in

______________________________________

11.65 @ 115

yea well i'm at work now and my mom has my camera in the bahamas so hopefully i can borrow one from work tonight (radioshack) and take sum pics when i get out of here ....... i hate this place!

heres the picture guys....enjoy and tell me whats up

http://photos.yahoo.com/bc/ibangdchoeclipse/lst?.dir=/My+Photos&.src=ph&.order=&.view=t&.done=http%3a//photos.yahoo.com/

http://us.f1.yahoofs.com/users/203a00bf/bc/My+Photos/__hr_bumper3.jpg?bc3PGZ.Af0nBlNFe

those are all pics of your front. the front doesn't look likes it's molded on. and should really never be either. but they should be able to fix that no problem.....

2006 WW IX MR
2003 BBY EVO VIII (sold)
256.9WHP & 277.9torque
http://s90395832.onlinehome.us/forum//index.php?sid=a70942a7f65043e6c873e12dcd300692

1998 Eclipse RS --show car--

the sides of the front aren't but in the middle... the under the hood part thats between the headlights is molded

i can't really see whrere your talking about, just the first link works not the second one...

2006 WW IX MR
2003 BBY EVO VIII (sold)
256.9WHP & 277.9torque
http://s90395832.onlinehome.us/forum//index.php?sid=a70942a7f65043e6c873e12dcd300692

1998 Eclipse RS --show car--