hey I finaly am gana put my blitz on that Ive had since summer, Noe Ive looked at the DSM tech manual and cyans site with no help. Ho can I get the damn 2 bolts that are the furthist front? The ones that you can feel or see by under the gas cap? Im so lost and I need to get it off ASAP! Thanks

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

go under by the wheel well, one of them bolts from the underside, and the othe screws in from inside the trunk, i hope i helped

______________________________________

11.65 @ 115

I got it thanks! hey, with ur blitz did u have to remove the reinforcement?

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

i had to remove the bar

Evan B
97 GS
Stamford CT
EvMan2345@aol.com

(Its actually stock sarrono red, but my digicam sucks, so it looks like a different color)

yah remove the bar, but its more of a pita to get the bottom plastic screws off, between the bumper and the suport, so just jump on the bumper till they break off

______________________________________

11.65 @ 115

yeah its on right now, there is only one more thing that is on my mind, its on the car now and fits, now where the fender meets at the "L" shaped part did you use n e thing there since the bracket is on the OEM bumper? Its raining now so Im in a break period before I have to make more holes and then take it off to cut the bottom off.

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

ya lost me, i only bolted mine by the center taillight, and under the fender above the wheel

______________________________________

11.65 @ 115

it would be alot easier to remove some of the panels in the trunk. those bolts in the fenders are pita.

95 GST | So-Cal

yah but the stock bumper is threaded so you cant bolt the blitz from inside the trunk

______________________________________

11.65 @ 115

Quick question...so with all the blitz kits you have to remove the front and rear reinforcement bars?

_____________________________________________
Jerrome B.
1995 GSX - Race
1997 GST - Drive
1995 GST - Who the hell knows

>i had to remove the bar
>
>Evan B
>97 GS
>Stamford CT
>EvMan2345@aol.com
>
>(Its actually stock sarrono red, but my digicam sucks, so it
>looks like a different color)

Which front end is that? or Which kit is it?

_____________________________________________
Jerrome B.
1995 GSX - Race
1997 GST - Drive
1995 GST - Who the hell knows

yes the reinforcement bar, front/back, had to go. i believe the front end ^ is a 97-99 stillen front.

95 GST | So-Cal

IS that not dangerous? Do you have to remove the reinforcement on all aftermarket bumpers for the eclipse? I remeber when i found this out on my last car, someone told me that you can total your car and seriously injured yourself if you remove it, even if going 5 mph. Are we talking about the same thing or is it different on the eclipse?

_____________________________________________
Jerrome B.
1995 GSX - Race
1997 GST - Drive
1995 GST - Who the hell knows

its a plastic bar, 5mph

______________________________________

11.65 @ 115

oh ok

_____________________________________________
Jerrome B.
1995 GSX - Race
1997 GST - Drive
1995 GST - Who the hell knows

yeah but the styrafoam is the stuff that will save your life

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/