How can I secure some mesh grill to a stock 98 talon bumper? the model i have didn't come w/ foglights so I can secure it to that either. I know you can use screws and drill into the bumper to secure it, but I really don't wanna do that. Any ideas? TIA. Hektik.

98' Talon ESi A/T
*Mods* Cold Air Intake, OBX 4-2-1 Headers, 2.5" Fireball Muffler, Reverse Indiglo Gauges, All Red Taillights, Bosch Plat Plugs
*Upcoming Mods* SRT-4!

i drilled a few tiny holes and used zip ties to secure mine

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

Fiberglass it in.

99GS MT | Star Stage 2 | GC coilovers | HurriganeGS tie bars | Tokico Illuminas | 17x7 Enkei RS5 | Baer track brakes |+

Your best bet is to drill the smallest holes possible and use color matching (or similar if that's not possible) ties on it. That's the norm. I guess you could get some of those adhesive backed hooks at Craftmart and put them inside the bumper cover and tie to that, but that's getting pretty ghetto imo.

Honestly....I used string and duct tape!!! It held up for as long as my bumper on - over a year!!! It was crazy how good it worked, how straight it stayed and you couldn't see it - plus I didn't have to drill. All I did was take some string, tie it around the mesh at the very top, then tape the string onto the back side of the bumper....hahah I know it sounds ricey as hell but you couldn't tell and it worked.

Your best bet would be to take off the front bumper, then you can kinda mold the grill around the holes and then fiberglass it on or glue it on.

-----------------
1997 Eagle Talon ESi
Check out more pictures here: http://mikelaidlaw.tripod.com



MODS
-----
Blitz Front Bumper - Invader Type 1 Side Skirts - 17" Gunmetal Motegi MR7's - Final Drive Gear Mod - H&R Lowering Springs - 97 Eclipse Headlights - Taillight Mods - Interior Colouring/Lighting/Accessories - Stereo - Intake Filter, Plugs and Wires

you could hot glue it in

The 2GNT is Gone... and the curse too!!

I didn't have to use anything to hold mine in place. I bought a big sheet of mesh that has something to do with drywall, not sure what it is called, and cut it to fit pretty tight on the inside of the bumper. Then I fed it through the middle hole around to the sides. Since I cut it to fit tight, it doesn't move around at all.

AEM CAI/ AFX UDP/ GST Muffler/ Magnecors/ NGK plugs/ Intrax Springs/ Symbroski Shift Kit

I used fiberglass resin to hold mine in on the sides wher4e
the foglights go. Just bent it up around the bumper and
glassed it in.
~Luke

----------------------------------------

I used to have a 420A...


'92 TSi AWD

11.8 @ 119mph
470awhp 405 ft/lb torque
30psi on E85 w/ Borg Warner S256 Turbo

My DSM Registry: http://www.dsmregistry.com/166