|
scuff the surface with 120-140grit or so, then using sandable primer, clean, prime, let dry, check for dimples/scratches, sand with 200-220grit if necessary, clean, prime, check for dimples/scratches, sand with 220-240 if necessary, clean, spray a "tack" coat of paint onto the area, DON'T sand, then spray a light coat, sand with 400, clean, spray a light coat, sand with 400, (you can do this step again, but it's not necessary), clean, spray with clear coat of your choice, sand with 600, clear coat, sand with 600, then use rubbing compound ~1500 grit on a soft cotton cloth and buff until shiny, wait at least 2 weeks before waxing That should do it man, any questions just IM me or PM me. Good luck _______________________________________________________
AIM: Critical Waltz
FOR SALE PM Me for info:
Red '95 GS ATX with mods
New Ride:
94 Acura Integra GS-R 5-Speed
Comptech Intake
Tein S-Tech
On the way:
Integra Type R Transmission with LSD
GReddy Turbo Kit (by end of summer hopefully)
chris2wire: you've been uber'd
|
Search
Printer-friendly copy
2 Users in Chat
