Need help on how to remove passenger side back window.... How do you do this?

Some bolt in, but im not sure about the eclipse. Most have adhesive and there are special tools for cutting them out, one way to get it out w/o these tools are, take your lower rear seat out and remove the inner panels around the glass. Get a small propane torch and warm up the metal lip that outlines the glass on the inside. You need to get really really warm, and have someone push it out from the inside while youre heating it. If youre trying to save the glass dont get the heat directly on it or it will shatter, not instantly but if you get it hot enough it will break. also the paint on the inside will burn off around where you heat it. If you do be Very careful you dont set your car on fire. I recomend you have someone do it that does it for a living just to be safe.

ASE certified master auto technician

its removed from the outside. you need to remove the black trim around it and use piano wire to cut it from the ribbon sealer.

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals