like it says, who's got em and whatchu doin??? Methinks i may pay off my car and start butchering it :p We'll see. This whole lamborghini door thing has me thinkin bout sweet ass alternatives to door opening and relocations of various parts of my car and whatnot. Jus need a garage and another car and y'all shall see some wierd shit. And prolly alot of procrastinating.

I'm still dreaming of redoing my interior all in custom fiberglass, I have taken the first step tho, getting a spare dash, so now it's all in sanding......fiberglassing....sanding...molding....blah, nother 2 months and I should be done

1993 Eagle Talon Tsi FWD
6 bolt swap COMPLETE!
ACT flywheel, ACT 2600, Joe P MBC, Autometer boost guage, Buschur DP, Buschur high flow cat, prothane motor mounts, BM tranny lsd insert, K&N,balance shafts eliminated, EGR blocked, free mods, and sweet ass 16g @ 18psi.

My project car has been going for about 6 months now. It's a '96 RS. It's got some major things done to it and more things on the way. It features a blitz front, and Rudora sides and rear that's all molded in, shaved handles and gas door. In the inside we installed a bolt-in cage, glassed the dash, racing seats, and glassed system in the trunk. The suspension has been swapped for a Hack Shack air ride kit. I've pretty much run out of money for it for a while, but I'm hoping to targa top it, maybe swap tailights, and go with a custom candy orange paint or even HOK Burple. I now own 3 DSM's, a '99 OZ Edition (my baby!), a '96 RS (project car), and a '91 GS-T (recently acquired, already done a host of mods) <----- All my money has gone to that one, HEHE!!

Custom Computers
http://www.virtual-octane.net

Once my car is off the road that is where all my money shall go. By then it should already have the 2.4 swap, and hopefully a turbo kit. After that i have a bunch of do-able body mods that will take me a while. I have my sinsei front finally. I'll prolly get rudora sides and the rear end from a no name company that i liked. Besides that i wanna relocate the gas tank, battery, and do some funky shit with a glassed up system. Hint: I know how to take apart electronic things and make them work with their pieces everywhere

whats up all.. sounds like there is gonna be some hot cars on the road come summer.
mods:
lambo doors (as u all know), finishing glassing dash (about 8 hrs left) then paint entire car inside and out (hok kandy brandy wine with ghost designes thru out. motor: je slugs eagle rods and a host of others (ner but dont tell anyone) t3/t4 kit and nitrous express ic chiller (almost complete) car has been dwn for like 4 mths. i need to quite adding more shit to do, but you all know how that goes... redoing air ride with aims competition 3/8 300psi valves on manifold (it is a nice set up and recomend it) been the other way and this simplifies and looks clean, plus leaks are nonexsistant. i would like to targa but not too sure on that, i dont need the body flex with the lambos.
im trying to decide wether to leave the kaminari wing on or to take it off.????? we shaved the tails and relocated the gas door to the rear and believe me, with the widebody kit the ass is wwwwwiiiiiddddeeee. but since the spoiler is so big it takes away from that. so i am at a delima. oh well we will see. no telling what else is gonna go on. depends on time and what it is./ take care all and good luck with your projects. i hope all are doing the mods themselves or at least a portion because you will appreciate it alot more. takes up some time and alot of trial and error but its really not that bad. not bad for a rookie

if u all need any help or advice im here, im not the guru but i have fuckd up alot of stuff so i guess i am kinda....
ben

http://www.imagestation.com/album/pictures.html?id=2134181717&mode=slideshow
t3/t4 setup, je pistone, eagle rods,aem cam gears, crane cams, port and polished head w swirl polished valves, avcr, autometer gauges to be installed, kaminari widebody kit shaved rain seals, door handles, tail lights, relocated gas cap, double humped hood, house of kolors candybrandywine 20in weld evo wheels, air ride, custom fiberglass work (dash interior) more to come just not enough time

Hey buck when we gonna see some pics of your front ?

______________________________________

11.65 @ 115

ugg check sig pic lol. Still waiting on my damn r33 tails and nitrous to get here. Next up is probaby the tranny including a CM clutch and Phantom grip lsd, afx udp, 60mm TB, greddy header and a ported intake manifold just to give it a little go. If I end up going all show the eclipse will get; molded bomex kit, custome modified and molded wide body kit, custome built cage, targa top, and some interior crap like system and a t.v. But on the other hand I may say screw show and go all out N/A since the car is striped anyways. either way I go I will probably not even get close to getting my car "done" and painted till end of next summer because my job sucks :'( This is probably the only time I am going to post what I MAY be doing so feel special

Slacker Motorsports
Some stuff......

i was in the process of making hoods. then started on my interior and my box, then stopped, since then, i've been buying alot of engine parts and trying to get all the parts i am going to need so that i don't break anything when i put the turbo on. that's my huge a$4 project right there.

Y'all will see pics of the front when i test the fitment......right now i am working on installing all my neon, minus my undercar kit. Then after that, prolly gonna work on puttin my interior back together. Then come spring time i am not quite sure what i'ma do. I wanna do the 2.4 swap, but if i get enough back from taxes i may jus pay off my car and take it off the road, then the 2.4 swap. Either way thats gettin done. Looks like i won't be out for next show season

Well, I am trying to finish my uberhuge project, but it isn't anything that will go in the interior/exterior forum, I am wrapping up my 2.4L swap, and will be using knowledge gained from it to help do BuckNutty's soon. Can't wait!
-=B-=

Dude, Boeing called. They want their wing back.

Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate.
Me: Can I put that in my sig?
Dark0ne95: GO right fucking ahead.

Not uberhugr...bug I've got plans. My up coming mods are: Bigass FMIC, Streetfyter front end, undecided sideskirts, undecided rear end.

I 'want' some type of fenders that flare out like the raceready BMW's..makes them look really wide...but noone makes any..

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

You will see mine with a new look in new updated pics come january or february. Till then I am not saying.

spy photos coming soon....

-Jason

97 Talon ESi-T (forever in progress...)


95 GS (Gone)
16.74@83.18mph
119.8 whp - 113.3 lbs/ft


2GNT #677
My Wiki Page: www.2gnt.com/index.php?d=Iamnotwhoiam
Pictures: http://picasaweb.google.com/iamnotwhoiam/Talon/

sweet i wanna see pics

______________________________________

11.65 @ 115

Hey Bill, may have a different project goin on. I was cruisin round and found a junkyard full of 30's and 40's coups. My gf is gonna check and see if we can't get sumthin hooked up. If so, then i'ma kit up the eclipse and set up my stereo shiznit. Then a big ol project will be comin round. n shit

"cruisin round and found a junkyard full of 30's and 40's
>coups. "

?????????????????

>whats up all.. sounds like there is gonna be some hot cars
>on the road come summer.
>mods:
>lambo doors (as u all know), finishing glassing dash (about
>8 hrs left) then paint entire car inside and out (hok
>kandy brandy wine with ghost designes thru out. motor:
>je slugs eagle rods and a host of others (ner but dont
>tell anyone) t3/t4 kit and nitrous express ic chiller
>(almost complete) car has been dwn for like 4 mths. i need
>to quite adding more shit to do, but you all know how that
>goes... redoing air ride with aims competition 3/8
>300psi valves on manifold (it is a nice set up and recomend
>it) been the other way and this simplifies and looks clean,
>plus leaks are nonexsistant. i would like to targa but not
>too sure on that, i dont need the body flex with the
>lambos.
>im trying to decide wether to leave the kaminari wing on or
>to take it off.????? we shaved the tails and relocated the
>gas door to the rear and believe me, with the widebody kit
>the ass is wwwwwiiiiiddddeeee. but since the spoiler is so
>big it takes away from that. so i am at a delima. oh
>well we will see. no telling what else is gonna go on.
>depends on time and what it is./ take care all and
>good luck with your projects. i hope all are doing the mods
>themselves or at least a portion because you will
>appreciate it alot more. takes up some time and alot of
>trial and error but its really not that bad. not bad for
>a rookie
>
>if u all need any help or advice im here, im not the guru
>but i have fuckd up alot of stuff so i guess i am kinda....
>ben

betta stop telling the secrets , before we have more stunnas at nopi next year than we can handle

HRC SUPER 16G FOR SALE BRAND NEW,, 800 USD
Dwayne H
A.K.A D-low
"PAID THE COST TO BE THE BOSS"

Fully built motor,Hrc stage 3, 19 inch rollers, Big Brakes, Targa top conversion, custom hood,supra taillights, trd wing with cf, kaminari widebody kit, air ride, autometer guages and all of Apexi Sacf, avc-r, rev/speed meter. interior fully glassed, tenzo r seats, pics soon to come!

bucknuty nooooooooooooooo man i havwe prided myself in being the only cah...as far as i know with sensi front and radora sides and rears but its ok man as long as u make it look good and make us proud i'm not gonna hate we're family

i was thinkin more along the lines of....sinsei front, kaminari widebody fenders, rudora sides, and there is a rear i want that was a lil company that was posted here back in the day. Then i will have my predator 6 vent thrown on. Should look sweet with all the neon and my stereo system in it. .

>i was thinkin more along the lines of....sinsei front,
>kaminari widebody fenders, rudora sides, and there is a rear
>i want that was a lil company that was posted here back in
>the day. Then i will have my predator 6 vent thrown on.
>Should look sweet with all the neon and my stereo system in
>it. .

prepare to spend around 1400 for the fenders alone not including shipping, not to mention, the fenders will need cutting sense your not running kaminari side skirts, and alot of modification to that sensi front<<(major mod) to get it to bolt up. probaly end up spending more money than i have on the outside, thats some serious work your talking about, good luck though, and btw, that bitch will look tough with that combo.....

HRC SUPER 16G FOR SALE BRAND NEW,, 800 USD
Dwayne H
A.K.A D-low
"PAID THE COST TO BE THE BOSS"

Fully built motor,Hrc stage 3, 19 inch rollers, Big Brakes, Targa top conversion, custom hood,supra taillights, trd wing with cf, kaminari widebody kit, air ride, autometer guages and all of Apexi Sacf, avc-r, rev/speed meter. interior fully glassed, tenzo r seats, pics soon to come!

shit wide im not a hatr. i let the cat outta the bag along time ago. oh well.
as far as kaminari stuff pm me and i will see what my connection at kaminari can do for u. and be prepared to open the check book if your not doin those mods yourself. u should try it because its not that bad.
ben

http://www.imagestation.com/album/pictures.html?id=2134181717&mode=slideshow
t3/t4 setup, je pistone, eagle rods,aem cam gears, crane cams, port and polished head w swirl polished valves, avcr, autometer gauges to be installed, kaminari widebody kit shaved rain seals, door handles, tail lights, relocated gas cap, double humped hood, house of kolors candybrandywine 20in weld evo wheels, air ride, custom fiberglass work (dash interior) more to come just not enough time

bodywork won't be a prob, maybe since i am gonna have a full glass front end i should jus do a headlight conversion while i am in there......damn....figures it'd have to turn into a bigger project then i initially planned. I have a couple friends that are gonna help me out....plus i am taking the car off the road for a long time once my friend gets his house, then we will have a garage to puts around in. And yeah, i know it'll be mean.....but while i'm at it i may as well throw a functional roof scoop on there that i can open and close at will............hmmmmmm.......i need a garage and alot of spare time, like, real soon