Ok I have a slite problem, my entire interior is gonna be white and light blue I have done everything fine up to the point when I tryed to remove my dash and relized it was glued the freak on there! Ok so whats better to do just leave it in and spray it in their with everything taped off? Or is it better to try and rip it out?

198hp @6350 rpm NA 420A (Thanks to new JE forged 9.5:1 Deep Dishers ready for Zex Nitrous 150 Shot) -THIS IS NOT MY CAR ITS A FRIENDS!

i left my dash in there and taped everything off. it worked out pretty well, just a lil thin near the windshield. hope it works out for ya and post some pics when your done!

"Hondas are like tampons, every pussy needs one"

1999 Eclipse
bomex 2 front and rear bumpers, blitz side skirts, chrome halo projector headlights, painted center tail section, shaved wing, carbon fiber OEM hood, 3 inch halogen fog lights, and 17 inch motegi ff7 hyper black rims.

unless i am wrong i think you should probably take out the dash, start at the bottom and work your way up, dont think it is glued, but just heavy, dunno though

______________________________________

11.65 @ 115

if you dont have much of an idea on how to get the dash out, I would just leave it in and paint it. There are lots of harnesses to unplug n you could miss one or two putting the dash back in or somethin. Just mask the hell out of everything, n spray away. rememer not to spray to close. spray nice light even coats until your desired color. good luck.


96 Talon ESi Mods
apex' dunk exhaust
injen short ram intake
magnecore 8.5mm wires
blocked off EGR
front/rear strut tower bars
custom painted interior
carbon fiber hood

I contributed to the Wiki.

Ok sounds cool Ill be diong that next weekend then ill post some pics once im done... I think I'll be leaving the dash in and just rip the rest out like mentioned to much wiring to hassle with when masking tape is only 99cents a role =D.

198hp @6350 rpm NA 420A (Thanks to new JE forged 9.5:1 Deep Dishers ready for Zex Nitrous 150 Shot) -THIS IS NOT MY CAR ITS A FRIENDS!

how long do u guys think my car would smell of paint if i wanted to do this?

the dash is not glued in. You might not have taken all the bolts out. Did you get the ones under the tweeters? And the wiring harnesses are no problem. They are all color coded and simply unplug from each other(omly about 5-6). You car will probably only smell for about a week, if that.

-------------------------------


1997 Dodge Avenger - 13.7 @ 105

i left mine in when i painted it, and mine is a little thin up near the dash too...i would take it out if you can, but it will work if you leave it in too.

>how long do u guys think my car would smell of paint if i
>wanted to do this?


a week or so