if i were to get some carbon fiber/kevlar fabric like this

to make a cover for the back seat area(so i don't have to have my back seat in) what would i need to coat it in, so that it has that hard, shiny surface?

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

http://www.shopmaninc.com/

should be able to fond some here

-------------------------------


1997 Dodge Avenger - 13.7 @ 105

any idea how much i would need ?

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

are you making a cover to go over your seats or are you taking the seats out and making a cover to go over the floor?

if your just recovering your seats I'd say about a yard. If you're recovering the floor if you take the seats out I'd say about 1.5 yards, maybe 2 just to be on the safe side(if you're doing the trunk too)

heres the blue I found on there

-------------------------------


1997 Dodge Avenger - 13.7 @ 105

just a warning...If your getting CF weave, id suggest not doing that and instead getting a fake CF lookalike fabric. CF is not soft and wouldnt be comfortable to sit on. Also, CF will start to fall apart if used as a normal cloth, as it was designed to be hardend.

1997 Eclipse GS
AEM CAI
Apex'i N1 Catback
Greddy Header
5% window tint
Front-Rear-Lower Rear STB's
Yellow Painted Calipers
1st gen altezzas with original painted center piece
Soon-Tokico Illum's or Blues

I don't think he's planning on keeping his rear seats.

-------------------------------


1997 Dodge Avenger - 13.7 @ 105

i was planning on removing the seat and since JESSE hooked me up this link http://www.shopmaninc.com i was wondering how much of this
i needed

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

Here's another link

http://www.fibreglast.com/products.php?session=d30688f14ba653461f152b889aa3fc65&area=6&PHPSESSID=590df67065b9d19967c0f238b247631e

>i was planning on removing the seat and since JESSE hooked
>me up this link http://www.shopmaninc.com i was wondering
>how much of this
> i needed

I'd estimate about 1 or 2 gallons. I'm not positive though as I haven't really had a chance do do anything with carbon fiber on my own yet. Maybe email those guys and tell them approx how much area you want to cover with cf and they can give you a close amount of resin you'll need

-------------------------------


1997 Dodge Avenger - 13.7 @ 105