http://students.washington.edu/ashis/Creating%20Custom%20Angel%20Eyes.htm

Your welcome, looks like a piece of cake to me and it DOES work

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

That is awesome. Looks like there will be lots o' peeps with projects this weekend including me!
-Chris b.

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

good find

Boca Raton, Florida
95 Eclipse GS- sold
99 Eclipse GSX- 386awhp
98 Eclipse GS- sold
92 Prelude

Can that only be done on projectors? I mean..... Is anyone who reads this going to try it on normal headlights? Im interested in trying... Put it around where the brights are. The problem is normal hedlight shines so ugly, stock, because its not projector. Its all over the place. Might look odd with a nice circle angel eye right next to it....

I got banned for being a constant tard.

Im gonna go to the Depot and get the shit I need for this. If it doesn't look right then I will take them out. The only hard part I see is the shapeing of the ring. I don't think the outer part of the highbeam is round so I might have to play with it a bit. Just for future refrence it might take me a little while to get this done. I am off of work this Friday and Saturday so I will try to get most of this done quick, but I will give an update as soon as posible. I am gonna to try to make the halo with a green led. Hope the green works.

dfresh

will post more pics when front is painted

i bet it would work better if he used round rods instead of octagon shaped.
later
"Z"

1997 GS
Normally-aspirated and staying that way
OBX-R Type H Exshaust
OBX-R Test Pipe
AEM Long Ram CAI
Denso Spark Plugs
MSD 8.5mm Spark Plug Wires
K@N Valve Cover Breather
OBX Front Strut Tower Brace
Stillen Rear Strut Tower Brace
VIS Vented Carbon Fiber Vented Hood
Arospeed Bumper Brake Wing
Sparco Shift Knob
Koni Adjustables
Eibach Racing Pro Springs
Buschur Racing Fuel Pump Upgrade
Crower Stage 3 Racing Cams
AEM Timing Gears
Upgraded Valve Springs
Titanium Retainers
Greddy Header
Thermal Header Wrap
---Minus the back seat-----
---Minus all A/C Accessories---
---Minus all Powersteering Accessories---
No Stupid Neons
No stupid indiglo gauges
No Stupid bass system radio
No Stupid Window Pisser Lights
---If it doesn't make my car go faster or run better, it won't be on my car-----


MY OWN PERSONAL OPINION....BEWARE.....Personally I think if your doing a "mod" like this or anything that is not done by a manufacturer is defently rice...whats the point exactly in the angel eyes? This defently goes into my rice of fame category

Old = 1997 Eclipse GS
New = 2005 Scion xB

Member # 2283

I agree to an extent. Angel eyes are strictly BMW, and strictly the newer ones. So its clear that theres copying going on towards a nicer car. But, these arent full circle angel eyes, athey are like half or whatever. Is that a big difference? No. People who know the idea wont be able to seperate it from what this mod is, and it will look like copying.

On the other hand, although angel eyes are strictly BMW, they arent used on all bmw's and arent that well known. Many people who see it will think its unique and not have a thought of bmw.

Im in the middle. I like it, but knowing a few people will laugh at me sort of kills it. Now I think alot more people would think its great compared to people not liking it, but for me, those few people just ruin the fun and I wouldnt do it just for that reason. if I saw it though, whether on a dsm or honda or whatever, I would think its nice despite it being from BMW. ANd I think that guy's crx looks very nice with them, very clean and different.

I got banned for being a constant tard.

^^ haters, fuck that go for it people angel eyes would look sweet on a eclipse

_____________________
98 Silver Eclipse RS ATX
CAI, header, bored TB, Apex N1, Pro-kit/Tokico combo, custom lower tie bars, cross drilled/slotted rotors

Thanks silvereclipsers for being on my side of this. I know if it looks shity people are gonna tell me, but if it looks dope people will say nice mod. If you didn't want to do your hedlights then you could do the center piece on the altezza's or all of them (which might be easier) or even the rings around the foglights. It really comes down to what the person wants because they are the one's that have to drive the car around. I admit it might look ricey but we will never know untill someone does it on an eclipse/talon and decide for themselves.....After reading what I typed I think I won't do the headlights, I have been sitting here thinking of what the tails would look like with this. I have carbon fiber altezza's and my car is green so what do you think of green rings in the center since they don't light up. I guess I will have to do it and find out what it looks like. If it looks good then I will post the pics but if it doesn't then you will never see them.

Any suggestion's on the color would be nice so help me out fella's

dfresh

will post more pics when front is painted

do it, and when it looks nice make the pigs eat their words

turbo8u: "jiggle jiggle then vroom vroom pshhhh"
-Mike Pruett
2gnt member# 976
MOPAR Stage 2
SRTForums.com member #37 (Yeah, I signed up when it first came out, and ended up getting one, cool huh?)
"The object of war is not to die for your country but to make the other bastard die for his."
- General George Patton (1885-1945)

I love it..I have a 25 dollar gift cert that I will use tommorrow

Kevin
The old:


The new:

the possibilities are almost endless with this light string/ring idea.. not that it even has to made into a ring at all.. hmm i might have to experiement with this also.

-Jason

97 Talon ESi-T (forever in progress...)


95 GS (Gone)
16.74@83.18mph
119.8 whp - 113.3 lbs/ft


2GNT #677
My Wiki Page: www.2gnt.com/index.php?d=Iamnotwhoiam
Pictures: http://picasaweb.google.com/iamnotwhoiam/Talon/

I made my own angel eyes last summer. They turned out really well. I used my 95-96 headlights. I loved them. Took them off the car because I needed the 97-99 lights for a blitz kit Go for it!! If you like it do it!

1995 Eclipse GS - Urethane Blitz Kit, VIS CF Invader hood, CF Wing, CF TYC Euro lights, Kamikaze Header, Dual Exhaust, 97-99 headlights, Nitrous Wet Kit, (2) Alpine Type R

I wasnt being a 'hater'. I was just saying how others may view it. As I said, if I saw it on a car Id love it. And I thought it looked great on that CRX on the website. I was just saying how others may view it. Also, how could you call the fake bov guy a hater??? yeah I thought so.

I agree the possibilites are endless. So no one answered, is anyone going to try this on non projectors? I mean stock headlights?

I got banned for being a constant tard.

how or where did you attach them to the headlights.. thats waht im still trying to figure out, cause i may do it on my 97 headlights and was curious since you said you had done it already... if you had pics that woudl be awesome too.

-Jason

97 Talon ESi-T (forever in progress...)


95 GS (Gone)
16.74@83.18mph
119.8 whp - 113.3 lbs/ft


2GNT #677
My Wiki Page: www.2gnt.com/index.php?d=Iamnotwhoiam
Pictures: http://picasaweb.google.com/iamnotwhoiam/Talon/

kinda got me thinkin too. maybe on the stock headlights you could do a sort of internal eyebrow across the top. or maybe get real ricey with it and put em around your speedo and tach? the idea being not so much to bite off a Bmer, but to take that idea and do something more creative and subtle

DOH! I was gonna surprise everyone with them. I've got my set made finally, I've been experimenting with different types of wands for the past 2 weeks, only 1 type will work well.. - and I am installing them this weekend. It isn't as easy as it looks, its very tedious. The dremel markings must be spaced very evenly, and the LED's fitment has to be just right. I'm going to do mine on the low beams, and have them run along with my sidemarkers while the headlights are off; then once the headlights are turned on you won't be able to see them. I'll post pics Monday and Tuesday, if everything goes as planned.

Here are some shots of what I have ready, not installed yet...

Here is a shot with my room light on....



Then here with the lights off...


And a close up of both..


p.s. Ahem...who knows how to take the headlights off without removing bumper? Please fill me in w/detials to save me hours of work..

EDIT: Forgot to mention - these look way better in real life, and contrary to most pics, imperfections are actually easier to see in the pics....both rings look identical to the human eye..yet the pics make them look a tad different....anyhow..pics soon

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

holy shit ryan make me 4 I'll buy them of you, how much did it cost to make? I was thinking of taking stock tail lights and then putting angel eyes as the brake lights, it would look sweet.

_____________________
98 Silver Eclipse RS ATX
CAI, header, bored TB, Apex N1, Pro-kit/Tokico combo, custom lower tie bars, cross drilled/slotted rotors

sweet ryan... i cant wait to see your finished product so i can make my decision as to how i want to do mine

-Jason

97 Talon ESi-T (forever in progress...)


95 GS (Gone)
16.74@83.18mph
119.8 whp - 113.3 lbs/ft


2GNT #677
My Wiki Page: www.2gnt.com/index.php?d=Iamnotwhoiam
Pictures: http://picasaweb.google.com/iamnotwhoiam/Talon/

wow that's awesome. i wouldn't mind trying this either.


How come you guys didn't put the notches all the way to the ends...to make a complete circle? Ryan? Does it only work when you make it a half-ring? I would prefer a complete circle imo

I like the idea of eyebrows with the stock headlights.

If you can't find the stuff at Home Depot you can always order from www.McMaster.com They have Acrylic and Polycarbonate(Lexan) rods of all diameters.

-J

You can go al the way around, but every line in the wand allows light to escape...making the overall ring dimmer. I think will my setup, it will give off an agressive look.

If you want a set e-mail me

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

I'm sure people sould also modify these to fit their headlights:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1873147449

-J

Dude! An unscrupulous individual could make a killing on ebay with these.
EDFDC OWNZ

Will Werk for Mods

1995 RS

Current Mods:
Cracked Front Bumper
K&N Intake
Flowmaster Muffler
Platinum +4 Plugs
MSD SuperConductor Wires
and one heavy Right Foot!!!!

**Badgers??? We don't need no stinkin' badgers!!!**

**No Shirt, No Shoes, No Dice!**

**************
Fucking Kangaroos.
**************

You could make a killing for a few months, until people who buy it start selling it. Remember, you sell one, then thats you and him selling. You both sell one, thats you, the guy, and your new buyer and his new buyer selling them. It just keeps multiplying.

I got banned for being a constant tard.

Plus since such a good right up is already all over the net, ebayer's will only sell to those that don't want to do it themselves.


________________________________________________________________________________________
current status - unknown
Project: Baby on the way


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

ryan how much did it cost to make?

_____________________
98 Silver Eclipse RS ATX
CAI, header, bored TB, Apex N1, Pro-kit/Tokico combo, custom lower tie bars, cross drilled/slotted rotors

Clear blind wands = $7
4 Blue LightEmittingDiodes's = $17
Electrical tape = $4
Total = ~$30

Time = 2 hours

Making these rquires lots of time. Having to heat the plastic and mold it perfectly, then space nice cuts with the dremel, drilling hold in the ends for LED's, mounting LED's....it all adds up -- hopefully it will be worth it..

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

You've got mail........As far as the headlight removing, I think it can be done by just taking out the black piece in the fender well, and pulling it out through the back. I am just going by what I have heard and I have never tried it myself so don't quote me on this.

dfresh

will post more pics when front is painted

You guys probably figured it out but you can take the headlight off without removing bumper. Got those screws on top and in the back, then one under the headlight. If youre careful you can get a ratchet under the headlight, above the bumper, and unscrew it then lift the headlight right out.

I got banned for being a constant tard.

Hey ryan, I tired to email you but it kept sending it back to me so put me down for a set. Email me the details about the Angel eyes.

dfresh99@msn.com

dfresh

will post more pics when front is painted

Yeah, put me down for a set too.

I've been thinking about doing this for a while now. I think it'll look great with the G2 dual projectors, or maybe with the altezzas in the back (can you take the plastic off on those?).

FadeGS

1997 Mitsubishi Eclipse GS - SOLD!
2002 BMW M3 - Garaged for the Winter
1992 Honda Accord - Beater for now
Shopping for another winter car...

I responded to everyones e-mails. Let me know via e-mail.

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

well the link isnt working for me, might be cuz its 3 yrs old ^^ i found this one as well:

http://www.geocities.com/crx_auto/angel_eyes.htm

looks easy enough, and im getting ideas for using this system on other lighting applications through the whole car.

you do realize that you repsonded to a thread from almost 3 years ago right?

later

2GNT #1865
2006 Yamaha YZF R6 (Blue/Black)
2005 Honda CBR 600 RR (Blue REPSOL)
2003 BMW 325I Premium/Sport Package
2003 Honda CBR 600 RR (sold)
1998 Mitsubishi Eclipse RS (sold)
Shuwa's links:
http://www.facebook.com/Shuwa29
http://s16.photobucket.com/albums/b50/shuwa29/



DarkOne> but we all have that inner ricer that is just dying to come out sometimes...

That first link that is suppose to work for everyone now still doesnt work for me!? I cant get it to work at three different locations??? Any ideas?