I went outside today and unlocked my car and pulled on the handle and the piece of sh*t fell onto the ground. i picked it up and noticed it was just plastic and tried to stick it back in there but no such luck. How much will the dealership charge to fix this?

Nos Fogger Kit,AemCAI, TopFuel UDP, pacesetter cat-back, ARD bored 57mm t.b., P&P intake mani, Ractive front/rear strut bars,rear tie bar,eibach sportlines,tokico blues, morosso wires, ngkIX plugs, konig subzeros,proj. heads,gunmetal tails, rev.indiglow gauges,reverse light mod

it happens to all of us. the handle by it self from the dealer is about $75. the guy that runs the parts dept. at my local mitsu dealership told me that when the cars were new and nobody needed the handles they were only $35. he also told me that in the 3 years he has worked there the cost of the door handle has gone up 3 times to $75 cause they are in higher demand. he's a nice guy and gives me everything at wholesale and sometimes he even forgets to charge me. i have no idea what it would cost with installation. i would guess around $200 at the dealers.

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

is it something i could install myself. I'm not some great mechanic or anything, just an ordinary car enthusiast but if i can save some $$$ i want to u know? 75 dollars is my whole pay check lol

Nos Fogger Kit,AemCAI, TopFuel UDP, pacesetter cat-back, ARD bored 57mm t.b., P&P intake mani, Ractive front/rear strut bars,rear tie bar,eibach sportlines,tokico blues, morosso wires, ngkIX plugs, konig subzeros,proj. heads,gunmetal tails, rev.indiglow gauges,reverse light mod

yea i seem to remember a wave of car doors breaking. like in a matter of a few weeks like 6-8 peoples door handles broke, lol. someone did a wright up i think, i dont think its that hard, but yea, 75-80 sounds like what most people paid.

-----------------------------------------
2011 Nissan Xterra Pro-4x

2007 Kawasaki Ninja 650R

1996 Mitsubishi Eclipse RS-NX 75 shot, AEM CAI, P&P t/b and intake mani-SOLD

1964 Buick Electra 225-all original, all power options, 325hp, 445ft/lbs tq

Welcome to the broken door handle club! Yeah, I also broke my door handle like around last April. Yeah, u can do it urself. I was able to do it, and I'm already one of those people that wouldn't do/touch anything on the car already. You'll just end up having a lot of scratches. Its basically just common sense I think. And some trial and error. Just remove everything until u get ahold of the door handle. Well, I didn't remove the window though, but its possible. I got the door handle for 60 bux. Satan was gonna charge me 130+ I think for installation. So I'm like, screw that. Well, hopefully u don't have power windows/locks cuz I think it'll be harder to remove all that wiring and shit...

SonicYan aka Mikey
1997 Eclipse RS
Pinoy Reppin' SoCal 2GNT
Best: 16.35 @ 83.05 MPH

go to your local body shop and they should be able to hook ya up, satan quoted me $300 for the handle, installation and painted, my body shop guy did it for $98 handle, installed, painted, and he washed my car

btw...if you do it yourself, you can do it somewhat easily if you do NOT have power windows/door locks, if you have manual you can, but forget it with power, it SUUUUUUCKS

1993 Eagle Talon Tsi FWD
6 bolt swap COMPLETE!
ACT flywheel, ACT 2600, Joe P MBC, Autometer boost guage, Buschur DP, Buschur high flow cat, prothane motor mounts, BM tranny lsd insert, K&N,balance shafts eliminated, EGR blocked, free mods, and sweet ass 16g @ 18psi.

Do you have an RS or GS? I have a guy down the street that also has handles from a 2g. I think you mailed me about a front. It's the same guy. Mail me, and at least we'll get her back together.

Shit is all apart. Typical...

i have manual locks and windows, i drive a black rs so black handles work if anyone will sell one. I got quoted at 180 today and was like screw that, i'll do it myself. If anyone can type up how to do it i'd greatly appreciate it. ALso if anyone has one for sale i'll buy it from you

Nos Fogger Kit,AemCAI, TopFuel UDP, pacesetter cat-back, ARD bored 57mm t.b., P&P intake mani, Ractive front/rear strut bars,rear tie bar,eibach sportlines,tokico blues, morosso wires, ngkIX plugs, konig subzeros,proj. heads,gunmetal tails, rev.indiglow gauges,reverse light mod

dood, epoxi that shit... mines still workin!

Boca Raton, Florida
95 Eclipse GS- sold
99 Eclipse GSX- 386awhp
98 Eclipse GS- sold
92 Prelude

I can get you one for $75, prolly less, and yea, try epoxying that shiat, it's worked for many people, I just like to replace something broken rather than patch it, it's all up to you imo

1993 Eagle Talon Tsi FWD
6 bolt swap COMPLETE!
ACT flywheel, ACT 2600, Joe P MBC, Autometer boost guage, Buschur DP, Buschur high flow cat, prothane motor mounts, BM tranny lsd insert, K&N,balance shafts eliminated, EGR blocked, free mods, and sweet ass 16g @ 18psi.

I have a passenger side door handle in black if anyone needs it. Paint is so so probaly a painting would be best. Hit me up and send me an e-mail if u need it. And at a hell of alot better price then 75.

my piece cracked inside or something, but how do i open the panels and stuff to get to the handle to replace it. I'll buy a new one prob. from the dealership and then once i get it, what do i do? How do i get inside the thing, how do i get the window crank etc. off w/o breaking it and any other info ineed.

Nos Fogger Kit,AemCAI, TopFuel UDP, pacesetter cat-back, ARD bored 57mm t.b., P&P intake mani, Ractive front/rear strut bars,rear tie bar,eibach sportlines,tokico blues, morosso wires, ngkIX plugs, konig subzeros,proj. heads,gunmetal tails, rev.indiglow gauges,reverse light mod