k stupid question - how do you take off the door cranks? (so i can take off the door skins) i can kinda see a clip or something inside if i push the skin in a little bit. TIA

'95 RS 5spd Red
Black Chrome Matrix Type X CAI
A'pexi N1 Catback Turbo Exhaust
Viper 500esp
Indiglo Gauges
Clear Bumper Lenses
Hiper White Bulbs
In the mail: SPAL Deluxe Power Window Kit, Power Trunk Kit

-marc

take a rag and wrap it around the section inbetween the crank and the panel. pull, and it should pop off. you use the rag to distribute more even pressure and keep from just braking the crank.

:shhh: i do cocaine :/shhh:

i just pushed in the door a little bit, then get a small flathead screwdriver and pull up that little pin. make sure you dont lose the pin whichever way you do it though.

Yeah, screwdriver method...also if you have a hook pick it's best. Don't just pull, you may break something.

Am I the only one who has the tool to pop that clip an dreinstall it? It's only a few bucks at a parts store.

Una salus victus.
He will triumph, who knows when to fight, and when not to fight. - Sun Tzu

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All motor in the making.

Injen CAI, P&P Intake Manifold, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730, Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines, AFX 55mm TB (re-installed once exhaust is done, intake was outflowing exhaust)

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Ive got the tool also he he he
its cheap and saves lots of time, but the screwdriver works also

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

to take off, like others said, push in the door panel and pop off the clip

to put it in, put the clip back on the crank first, then push the crank on