#31054, "Another question!! Whats up with my power locks?!"
Ever since i got my car back from the shop, the power lock will not work. SO i finally took off both door panels to see if maybe something was wrong or what? So anyway i take off the panels and try the lock again to watch the bar and see what they do. And someimtes they will lock. Although it seems like it is strugglong, and sometimes it wont. I know its getting the "lock signal via the wires" because everythime i hit lock or unlock my alarm brain will make a little clicking noise, so i know its not a faulty wire. What else could it be? Kinda weird that once in a great while they will lock. Other times i can hear the lock "motor" make a noise like its trying to lock them. And then other times i dont hear any noise at all. Is my motor going bad or what?
#31056, "RE: Another question!! Whats up with my power locks?!" In response to Reply # 1
Dino? Whatd you do? It seems now that my driver side one works quite a bit of the time but the pass. side never works. I greased everything i could thinking that would help but no avail
#31057, "RE: Another question!! Whats up with my power locks?!" In response to Reply # 2
Sounds like your door lock motors have dirt and crap in them. I had this same problem. http://gc.dsm.org/faqs/doorlocks.htm <---- Go to file and Save As Web Page Complete so you can see the pictures. It tells you how to clean them out and that should fix your problem. Good luck.
Jason '11 Ford Mustang GT/CS '11 Ford Mustang V6 6-Speed (SOLD) '04 Nissan 350z Touring (SOLD) '95 Turbo Eclipse GS (SOLD and will be missed) '90 Talon TSi AWD (SOLD)
Search
Printer-friendly copy
1 User in Chat
