I gotta ditch this rear upper strut bar I got. My trunk cover dosen't sit flush with the trunk causing a bouncing effect with the cover, which is really annoying. For the people with RUSTB which one are you using and does it sit lower than the trunk cover so that it (the cover) sits flush with the trunk?

_________________
James

wanna sell it to me?

adam

1990 Eclipse GS-T

I have one that does make contact with the cover but still allows it to sit all the way down. I just ended up getting some weather stripping to put between it. The bar I got was from procarparts.com

Chad

MODS:
3" PVC CAI, GST Muffler, Greddy 4-1 Header, AFX UDP, 55 mm bored TB, P&P Intake Manifold, Corbin intake spacer, gutted cat, Apexi S-AFC, KYB AGX Struts, Eibach Prokits, Excel TZ-10 Rims

I bought the Pilot Motorsports one for the purpose that it sits low. You can see in this pic even though the cover isnt on that it sits alot lower than alotof the strut bars they sell.

98_silvergs....that is exactly the type of bar I am looking for. Cool and thanks for the pic.

I'll put mine up in the FS section later on today.

_________________
James

where'd you get that pilt motorsoprts one @?? It looks as if i could fit two back there with one of thoses and the present one i have

I got it at www.jcwhitney.com

I have all 3 pilot bars and am very happy. Yeah, the rear fits nice!!!

Second Place "Sanford Sound SLAP 2005" Mild 2-Door
http://www.sanfordsound.com/carwash2005.htm
Second Place "Scrapefest 2002" 2nd Gen Mild
1995 GS AT, 97-99 Conversion.
2000 BMW Z3 2.8
1999 Chevy K2500 crew cab
5 jets skis, 3 snowmobiles, 2 ATVs. BRAAP!
Member # 1147

Just a warning with the pilot bars.... I have them also, but id highly reccommend removing the bolts that they come with and replace them with high quality bolts like S.S. from home depot or something...I sheared the crappy stock pilot bar bolt right off with a regular wrench...

1997 Eclipse GS
AEM CAI
Apex'i N1 Catback
Greddy Header
5% window tint
Front-Rear-Lower Rear STB's
Yellow Painted Calipers
1st gen altezzas with original painted center piece
Soon-Tokico Illum's or Blues

Good info. Thanks

_________________
James

i have the Procarparts bars and my trunk cover made contacto with it too, so what i did is smashed up the little metal support beam in the middle of the trunk cover so it couldn't touch my bar, then masked everything off and painted it black so it didn't look trashy.

Green 95 GS 5-speed
Engine--PCP cold air intake,Greddy header,Accel 8mm wires,OBX custom exhuast.

Suspension/Brakes--Sprint 2' springs, KYB Gr2's, EBC Red Stuff pads,17" Konig Traffiks (silver), 215/45/17 Yokohama AVS ES100's, 15 dollar camber kit.