how in sam's hell do i get to those 2 bolts one under the headlight assembly the other attaching the front facia to the fender.. honestly my hand doesnt fit in there .. and i am very aggravated... you could imagine taking apart all those bolts & screws just to be stopped beacuse i dont have tiny baby hands .. any suggestions would be helpful ?

Unorthadox racing pulley
Aem short ram intake
Apex-i N1 cat-back(2.5)
Nakiyama flat black euro tails
Black projection headlights
Oz m

you're talking about the bolts that hold the bottom of the headlights on right? If so, Take a flat head screwdriver and wrap it in a towel. Then put it inbetween your headlight and bumper and pry them apart genlty. Then take a long extension and socket and you should be able to get to it

-------------------------------


1997 Dodge Avenger - 13.7 @ 105

for the fender you can take out the plastic in the wheel well and you should be able to get to those bolts easily

-------------------------------


1997 Dodge Avenger - 13.7 @ 105

alright ill let u guys know this sunday. hopefully i can get these projectors in already .

Unorthadox racing pulley
Aem short ram intake
Apex-i N1 cat-back(2.5)
Nakiyama flat black euro tails
Black projection headlights
Oz m

i could not get to those bolts that hold the headlights on so i just took the whole bumper part off and it just slides right off. if u dont know what i am talkin about it, if u look under the car there should be two bronze bolts that hold the bumper on just take them off along with everything else beside the ones under the headlight and u should be able to take it out!!! look at pic |
|
|
V

ill let u guys know this weekend thankd for all your help guys this should be fun

Unorthadox racing pulley
Aem short ram intake
Apex-i N1 cat-back(2.5)
Nakiyama flat black euro tails
Black projection headlights
Oz m