Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 0 Users in Chat
Top 2GNT Technical Interior/Exterior topic #28992
View in linear mode

Subject: "question about interior vents?" Previous topic | Next topic
blinkbizkit500Aug-15-02 06:17 PM
Member since Jun 21st 2002
1513 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#28992, "question about interior vents?"




          

ok guys i did a search but came up with nothing...

i am going to paint my interior vents (not the dash, just the 2 middle vents, vents on the doors, and the cupholder cover and other cover on the RS console section). my question is do the vents just pop out? or do they have screws or something i have to worry about? and what about the covers? keep in mind i have an RS so i dont have the whole center console. also, i got this stuff from the auto parts store that is actually a spray can of the exact color green from my car and it is touch up paint. what is the best way to go about painting the vents and covers? should i spray one coat, two? how long do i let it dry? and what's the best way to paint it so it doesn't drip, or botch up? thanks a lot guys

steve

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

AggressionAug-15-02 11:28 PM
Old School 2GNTer
3025 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#28993, "RE: question about interior vents?"
In response to Reply # 0




          

REMOVE:
Ok the vents in the console will pull right out, but the ones on the dash are screwed in. And depends on what vents on the door your talking about...if you mean the ones on the top by the rearveiw mirror no that on is screwed in and you need to remove the door panel to unscrew two tiny screws, but if you mean the ones by the armrest itself then yes those ones pull out.

PREP:
To make the paint stick to the panels its a good idea to wetsand them down first. First use a 240 grit then move to a 300 and then a 400 and that should be good. If you don't want a smooth look then just make sure you clean the panel really good with soap and water and be careful not to touch the panel with your fingers before painting...because the oils on your fingers will not let the paint stick to the panel as well. You can also rub the panels with rubbing alchol as well before painting.

PAINT:
If you want to do it right the first time I would recommend painting the panels with SEM paint. If you don't want to use SEM you can use a krylon paint with a clear coat. I did about 3 coats of paint and about 4 coats of clear. But you will be able to tell by the way it looks and what look your looking for. The more coats of clear you add the shinier it will look.

Hope this helps you some.

--------------------


- 05 Subaru STi
- 97 eclipse gs (289whp w/ 276tq)

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
blinkbizkit500Aug-16-02 05:53 AM
Member since Jun 21st 2002
1513 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#28994, "RE: question about interior vents?"
In response to Reply # 1




          

thanks a lot!!! im gonna try it either tonite or tomorrow...thanks again!! emoji

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Interior/Exterior topic #28992 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.054 seconds, executing 18 queries.