I bought a grill for the front bumper but never got instructions on how to take the dame thing off. Next summer I plan on getting a bodykit, so I'll need to take the bumper off again. Do I need to remove the 5 or so bolts under the hood and all those underneath? Bare with me now, I'm a girl so try to speak English! Thanks to all that can help. :o)

1998 GS-Turbo KANDY -- For Sale
1999 GS-Non Turbo 10th anniversary Edition

I have been in bed with Dino.....ask me for a picture!

hehe, i'll reply cuz your a chik...

to take the front bumpa off, u need to take the bolts out from the front (in between the headlights, 5 i think).. there will be two bolts in each fenderwell, they are semi-difficult to get to, and then four bolts on that hold the bumper to the frame.. they are larger bolts, and are right behind the radiator (closer to firewall) several inches...there are two at each support.. so 5 on top, and 8 on the bottom...

for future reference... my bumper is bein held by 4 bolts between the headlights, zipties in the fender wells, and the 4 mounting bolts on the frame....

the bumper is kinda heavy too so u may want to invest in sum help payable in beer

good luck

03 srt-4 13.130@112.47mph (n2o, stock turbo, 10/2003)
now: 20g, portfueler, bpu+++ (track/dyno times tbd...)

i farted on your wiki

Hey try this page. it will tell you how to take the bumper off. http://www.geocities.com/blue2gnt/Body_kit_install.html
also at the top of the forum page click on the MODS section to find the same link.

I was right there with him untill the light turned green.