Right now Im attempting to replace my stock fog light bulbs with new hyper-white bulbs. Im sure this will be an easy answer...how do I take the old bulb out and put the new one in, what screws do I remove?

_____________________________________
Jason ESi-T

04' BMW 325Ci
91' Nissan 240SX
98' Eagle Talon ESi (sold)

Opps, I accidently posted on Jason's name (Im at his house), anyhow, how do you replace the factory bulbs with the new ones, which screws do I remove?

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

They give a very detailed way in the manual...jus check that...i tried taking my out but i stripped the diamn screw so be carefull


1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition
Check Out My Site For Pix
http://mywebpages.comcast.net/EclipseRaceR/Drop/

2002 Subaru Impreza WRX

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition

Too late...I striped the screw.... But I still got the bulbs in and hooked up...but when I turn my lights on, the fog lights will not light up....god damn another light prblem great.

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

same problem here...stipped crew project is going on 65days and counting!

AFX/UDP,AEM,AF/X 55mm TB,50 shot of NOS,Glenn's short shifter,17" tantrum,prokit KYB AGX,JL stealthbox sony headunit,audiobahn amp,M3 style mirrors,Blue leds,yellow fogs,reverse ind,w

Just replace the whole foglight housings with some new, cool foglights. That's what I had to do, cuz one of my lenses was completely shattered. Here's what I got:



Black '98 GS auto
I-vers intake
Custom (home made!) ram air conversion
OBX fog lights
RSR rear section straight outta Japan
JVC cd player
Kenwood components
Sony XM-250 amp
10" Polk DX sub

"Life isn't like a box of chocolates...it's more like a jar of
jalapenos.
What you do today, might burn your ass tomorrow."

What kind of lights did you replace them with? Were they fairly simple to mount or did you have to do some fabrications?

Chad

MODS:
3" PVC CAI, GST Muffler, Greddy 4-1 Header, AFX UDP, 55 mm bored TB, P&P Intake Manifold, Corbin intake spacer, gutted cat, Apexi S-AFC, KYB AGX Struts, Eibach Prokits, Excel TZ-10 Rims

They're OBX fogs. I don't remember what type though. They are about 3 or 4 inches rond with a blue lens. I would get 5 or 6 inch round fogs if I had to do it again though.
I just unbolted the old fogs, and used the existing screw holes. In fact, they are only held on by one screw apeice! Then I just cut the wiring harness off, and used the factory wiring for power. They are sunken in a little bit from the bumper though and would look nicer if they were flush with it, and also I couldn't reuse the old bezel that went around the factory fogs. I think it looks better though.



Black '98 GS auto
I-vers intake
Custom (home made!) ram air conversion
OBX fog lights
RSR rear section
JVC cd player
Kenwood components
Sony XM-250 amp
10" Polk DX sub

"Life isn't like a box of chocolates...it's more like a jar of
jalapenos.
What you do today, might burn your ass tomorrow."