|
http://www.webphotos.com/list_photos_edit.asp?mi=1&smi=1&a=78302 ok guys here is the best i can do i will take better pictures soon as i get a day off this ones are a bit blurry but hopefully it will help u out i think Lo RS 4Me Member since 4-Apr-02 1 feedbacks, 2 points 23-May-02, 10:54 AM (PST) 4. "RE: Amber out healights" In response to message #3 materials: Butter knife ( thick, strong one ) phillips head screwdriver oven ok it only took me like 1 and half hours the first taking an hour the second 30min, ok take your light, pop off all the metal tabs off with butter knife, pre heat oven to 200 deg. ( seems hot but it WILL not melt your lights) let sit in oven for 10 min, pry open assembly, it will be easy b/c the oven melted the silicone, 2 screws hold amber peice in place, remove, them and take peice out put screwed back in to hold the silver peice on, go ahead and clean them out real good while u have them apart, put back together as tight as possible, put in oven for 10-20 more min, pull it out and push it together and hold it for a few min, keep pushing all around it, this is sealing it back up you melted the silicone again now you're letting it try and re- seal, and there ya go you got a sweet headlight
in need of boost
![]()  ![]() 
|