Does anybody have a write up on installing side markers? I've had these damn things for a while now and I think I'm going to try to install them this weekend. I want them to alternate with the blinker. (you know blinker, sidemarker, blinker, sidemaker)

If there's no write up I'd still be interested in hearing from you guys that have'em.

Thanks

you have to drill out the hole for your side marker.... if your not good at cutting stuff out i would just take it to a shop and have them do it for you..........

The hole onle has to be big enough for the wire harness to fit right?

Just drill it the size thats what i did.
Late

can you tell me where i can get some? and also, what kind of shop will install them for you?

Dude, they're everywhere. Check ebay. Pep boys even sells APC sidemarkers. Don't spend more than $15 on them. If there's a shop around you that works on imports take it to them, they should be experienced, if not just call around and ask.

i put the audi a4 sidemarkers in cause they are only 1in by 1in squares. and then i changed the white lights to piaa wedge yellows and there look tight as hell

got a dremel? then you can install them very easily.. first map out where you what it mounted, and take measurements so both sides are the same. then cover the whole area with masking tape.. then stencil on your sidemarker, drill a hole, and make the cut for the sidemarker with a dremel. its best to make it smaller the first time then bigger! then remove the masking tape, install them and wire them to your turns.

Thanks man, looks like I got a project.

Hey bro, there's a white and a black wire. If I'm wiring them to my turns what gets wired to what?