What's up guys, I lowered my car to the ground for the first time in a few months.... but the new tires are really close to the lip on the inside of the rear fender wells. There is about a pinky worth of room in between the tire and the lip, I know some of you all have come across this problem and rolled the lip up, how do you do this properly? I dont want it looking shitty or not do the job.... but the only thing i can think of is to cut a slit in the lip every 2-3 inches, and roll it up with a wooden handle or something? any info is much appreciated, couldnt find anything using search feature..

I just used an old aluminum baseball bat and bent the knife-edged lip up so it wouldn't hit the tires.



________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

How much clearance is needed to be safe? the last thing i wanna do is ruin 2 brand spankin new tires, hehe...

Could you use a dremel to cut away most of it and then just roll up a little bit to reduce the sharpness.

http://www.2gnt.com/cgi-bin/dcforum/dcboard.cgi?az=show_thread&om=1484&forum=DCForumID15
http://www.2gnt.com/cgi-bin/dcforum/dcboard.cgi?az=show_thread&om=231&forum=DCForumID15

Don't worry, I didn't use the "regular" search option. You wouldn't have been able to find these.

------------------------------------------------
98 ESi
95 GS