Alright, I'm really getting tired of the hatch cover rattling all the time. Does anybody have a fix that works? I already tried lining the edges with foam, but that just compresses and then flatens out. Thanks in advance.
#1773, "RE: Help with hatch cover...." In response to Reply # 0
Man I have the same problem with mine. Every time I hit a bump it rattles. I'm thinking of taking apart my hatch this weekend and seeing how this things is hooked up. I will let you know as soon as I am done.
#1776, "I guess I will let you in on the secret" In response to Reply # 3
Install a rear upper strut tower bar and then put the minature seatbelt shoulder pads on the bar. Slide them inward until the left one lines up with the metal crossbar on the underside of the rear hatch cover and the same for the right one. When you close your rear hatch, the hatch cover will rest slightly on the STB before the car hatch locks in. You will not have to adjust your hatch lock and the fit will be snug. Your hatch cover will never again rattle and will look nifty when you open it up to reveal those little mitsu/ralley art/eclipse pads. If you cannot find any of these on the net, S&A Motorsports(501-450-6333) sells them for around $10-12 per set. He even has the rear upper bars in stock as well. Now the secret is out.
#1778, "RE: I guess I will let you in on the secret" In response to Reply # 4
Well man, that fix won't work for me. The strut bar I have back there sits about 2 inches lower than other bars. The mounting brackets for the Tenzo bar are different.
Search
Printer-friendly copy
1 User in Chat
Just kidding...
